In physics, shear rate is the rate at which a progressive shear strain is applied to some material, causing shearing to the material. Shear rate is a measure of how the velocity changes with distance.
Simple shear
The shear rate for a fluid flowing between two parallel plates, one moving at a constant speed and the other one stationary (Couette flow), is defined by
where:
- is the shear rate, measured in reciprocal seconds;
- v is the velocity of the moving plate, measured in meters per second;
- h is the distance between the two parallel plates, measured in meters.
Or:
For the simple shear case, it is just a gradient of velocity in a flowing material. The SI unit of measurement for shear rate is s−1, expressed as "reciprocal seconds" or "inverse seconds".[1] However, when modelling fluids in 3D, it is common to consider a scalar value for the shear rate by calculating the second invariant of the strain-rate tensor
- .
The shear rate at the inner wall of a Newtonian fluid flowing within a pipe[2] is
where:
- is the shear rate, measured in reciprocal seconds;
- v is the linear fluid velocity;
- d is the inside diameter of the pipe.
The linear fluid velocity v is related to the volumetric flow rate Q by
where A is the cross-sectional area of the pipe, which for an inside pipe radius of r is given by
thus producing
Substituting the above into the earlier equation for the shear rate of a Newtonian fluid flowing within a pipe, and noting (in the denominator) that d = 2r:
which simplifies to the following equivalent form for wall shear rate in terms of volumetric flow rate Q and inner pipe radius r:
For a Newtonian fluid wall, shear stress (τw) can be related to shear rate by where μ is the dynamic viscosity of the fluid. For non-Newtonian fluids, there are different constitutive laws depending on the fluid, which relates the stress tensor to the shear rate tensor.
References
- ^ "Brookfield Engineering - Glossary section on Viscosity Terms". Archived from the original on 2007-06-09. Retrieved 2007-06-10.
- ^ Darby, Ron (2001). Chemical Engineering Fluid Mechanics (2nd ed.). CRC Press. p. 64. ISBN 9780824704445.