EMD SD40-2 | |||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() Montana Rail Link XDM SD40-2 diesel locomotive 250 at Everett, Washington, United States, January 1994 | |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
|
The EMD SD40-2 is a 3,000-horsepower (2,200 kW) C-C diesel-electric locomotive built by EMD from 1972 to 1989.
The SD40-2 was introduced in January 1972 as part of EMD's Dash 2 series, competing against the GE U30C and the ALCO Century 630. Although higher-horsepower locomotives were available, including EMD's own SD45-2, the reliability and versatility of the 3,000-horsepower (2,200 kW) SD40-2 made it one of the best-selling models in EMD's history, edged out only by the GP9, and was the standard of the industry for several decades after its introduction. The SD40-2 was an improvement over the SD40, with modular electronic control systems similar to those of the experimental DDA40X.
Peak production of the SD40-2 was in the mid-1970s. Sales of the SD40-2 began to diminish after 1981 due to the oil crisis, increased competition from GE's Dash-7 series and the introduction of the EMD SD50, which was available concurrently to late SD40-2 production. The last SD40-2 delivered to a United States railroad was built in July 1984, with production continuing for railroads in Canada until 1988, Mexico until February 1986, and Brazil until October 1989.
The SD40-2 has seen service in Canada, Mexico, Brazil and Guinea. To suit export country specifications, General Motors designed the JT26CW-SS (British Rail Class 59) for Great Britain, the GT26CW-2 for Yugoslavia, South Korea, Iran, Morocco, Peru and Pakistan, while the GT26CU-2 went to Zimbabwe and Brazil. Various customizations led Algeria to receive their version of a SD40-2, known as GT26HCW-2.
Appearance and spotting features
As the SD38, SD39, SD40, and SD45 shared a common frame, so too did the SD38-2, SD40-2, and SD45-2. It was 3 ft (0.91 m) longer than the previous models, giving a length of 68 ft 10 in (20.98 m) over the coupler pulling faces. The SD38-2 and SD40-2 shared the same basic superstructure, since they used the same 16-645 engine (in Roots-blown and turbocharged form respectively); the long hood was 18 inches (457 mm) longer than the SD38 and SD40, but since the increase in frame length was even greater, the SD38-2 and SD40-2 had even larger front and rear "porches" than the earlier models. These empty areas at front and rear are spotting features to identify the Dash 2 models of both units. The SD40-2 can be distinguished from the SD38-2 by its three roof-mounted radiator fans instead of two, and a single large exhaust stack instead of two smaller stacks.[1]
The increase in the frame length between the preceding 40 Series and the 40-2 Series six-axle locomotives was made to accommodate the new HT-C truck design, in which the traction motors all face the same direction, making the trucks longer. After a series of derailments involving Amtrak SDP40F units that were equipped with "hollow bolster" HT-C trucks, applied only to the SDP40F, Conrail ordered the SD40-2 units and several orders of SD50s with the older Flexicoil trucks, but the HT-C truck was vindicated and it ultimately went under most 40 Series, 50 Series and 60 Series six-axle locomotives, and this truck is still found under many remanufactured locomotives. [citation needed]
Some SD45 and SD45-2 units have been modified by replacing their 20-cylinder engine with the 16-cylinder removed from scrapped SD40-2 units; this was common on Union Pacific and possibly other railroads. In many cases these are identified by the owner as SD40-3, SD40M-2 or some such. Confusingly, what appears to be an SD45 is labeled as an SD40-2. Older SD40-2 units used in low-power modes such as yard switching or hump service have been de-turbocharged, resulting in the mechanical equivalent of a SD38-2. Units so modified may or may not be re-labeled. [citation needed]
There are several variations of the SD40-2 such as the SD40T-2s (Informally: T for tunnel motor; the actual EMD designation is "SD40-2 With Cooling System Modification", as stated on this model's EMD manuals) bought by the former Southern Pacific, and Denver and Rio Grande Western railroads; now operated by Union Pacific. The SD45 tunnel motor equivalent, the SD45T-2 model, was also utilized by Southern Pacific. Many tunnel motors were rebuilt and sold second-hand to a handful of American shortlines including, Bessemer and Lake Erie, Illinois Railway and Missouri and Northern Arkansas, as well as Canadian shortline Goderich-Exeter Railway. There is the SD40-2W (W for the 4-Window Safety Cab) bought and operated by the Canadian National railway. High-nosed versions of the SD40-2 were bought by Norfolk & Western, & Southern Railway. These units are now operated by the Norfolk Southern Railway (Resulting merger of N&W and Southern Railway). A narrow gauge version produced for Ferrovia Central Atlantico in Brazil is the BB40-2. [citation needed]
Three cabless SD40-2Bs were also rebuilt from standard SD40-2s by the Burlington Northern Railroad in the early 1980s. The units had been in collisions and BN decided that it was more economical to rebuild them without cabs. Canadian Pacific also owns a few SD40-2Bs. These were created by welding metal plates over the cab windows of many of its ex-Norfolk Southern and some of its original SD40-2s. [citation needed]
- SD40-2 production variations
-
NS 3204, an example of a SD40-2 built with a high short hood.
-
NS 3408, which rides on Flexicoil C trucks.
-
Ohio Central Railroad System 5855 was built with an extended rear deck.
Additional specifications
![](Https://upload.wikimedia.org/wikipedia/commons/thumb/e/e8/CSXT_8029.jpg/220px-CSXT_8029.jpg)
Main generator: | AR10 alternator |
---|---|
Traction motors: | 6 × D77/78 DC |
Standard gearing: | 62:15 |
Maximum speed with 62:15 gearing: | 65 mph (105 km/h) |
Continuous TE with 62:15 gearing: | 83100 lb |
Original owners
American SD40-2 orders | |||||
---|---|---|---|---|---|
Railroad | Quantity | Road numbers | Notes | ||
Atchison, Topeka and Santa Fe Railway | 187 | 5020-5192, 5200-5213 | Almost all in service with BNSF Railway, BNSF 6351 was wrecked and scrapped at Gunter, Texas in 2004. | ||
Burlington Northern Railroad | 835 | 6325–6334, 6348–6373, 6376–6385, 6700–6836, 6840–6847, 6850–6851, 6900–6928, 6950, 7000–7291, 7800–7940, 8000–8181 | Most now in service with BNSF Railway and leasing firms, BNSF 6789 and 7138 were retired after a serious accident near Gunter, Texas in 2004, 7167-7205, 7206-7235, & 8074-8089 were the only SD40-2s built by General Motors Diesel as exports to the United States, when EMD LaGrange IL plant was overloaded with orders. EMD sent the three orders to GMD London, Ontario. Burlington Northern 7149 and 7890 were LNG test units modified by energy conversions. Several units were wrecked, sold, retired, or scrapped before merger with Atchison, Topeka and Santa Fe Railway. | ||
Burlington Northern Railroad (Colorado and Southern Railway) | 27 | 900-925 980-996 | All units were later renumbered to 6348-6373 6850-6950, and later sold to Burlington Northern. Most now in service with BNSF Railway. | ||
Baltimore and Ohio Railroad (Chessie System) | 20 | 7600–7619 | Now in service with CSX Transportation | ||
Chicago and North Western Railway | 135 | 6801–6935 | Most now in service with Union Pacific Railroad, No. 6847 was donated and restored at the Illinois Railway Museum. | ||
Conrail | 167 | 6358–6524 | Equipped with flexicoil trucks. Now renumbered and in service with CSX, Norfolk Southern, or leasing firms | ||
Clinchfield Railroad | 5 | 8127–8129, 8131–8132 | Units were delivered in Family Lines Paint, to Seaboard System, now in service with CSX Transportation | ||
Illinois Central Gulf Railroad | 4 | 6030-6033 | 6031 was converted into 6200, 6033 was destroyed in a collision in Flora, Mississippi on February 6, 1994 | ||
Kansas City Southern Railway | 46 | 637–666, 667–676, 677–686, 687–690, 691–692 | 637 was the very first SD40-2 constructed in January 1972; 677-686, 687-690 were built with extended "snoot" noses. Many are now in service with Canadian Pacific Kansas City. | ||
Louisville and Nashville Railroad | 191 | 1259–1278, 3554–3613, 8000–8039, 8067–8086, 8095–8126, 8133–8162 | 8000s units delivered in Family Lines Paint; all to Seaboard System, now in service with CSX Transportation. | ||
Milwaukee Road | 90 | 21–30, 171–209, 3000–3040 | Now in service among several various railroads. | ||
Missouri–Kansas–Texas Railroad | 37 | 600–636 | Most are now in service with Union Pacific Railroad. Order based on Burlington Northern specifications for Pooling Service. | ||
Missouri Pacific Railroad | 306 | 790–838, 3139–3321, 6020–6073 | Most are now in service with Union Pacific Railroad. 790–838 & 3139–3321 lack dynamic brakes. 6020–6073 were based on Burlington Northern specifications for Pooling Services. Considered the heaviest SD40-2s ever built. | ||
Oneida and Western Railroad | 8 | 9950–9957 | Not an actual railroad - Order based on Louisville & Nashville specifications. Later became BC Rail 743-750, 749 is now GECX 749. | ||
Kennecott Utah Copper Corporation | 7 | 101–107 | Delivered with shorter 2,600 gallon fuel tanks and an additional third air reservoir for heavy ore drag operations. Units were retired in 1984 and put under leasing firms. Later became BC Rail 736-742 in 1986. Six units were sold in 1996 and are now HLCX 6204-6210. | ||
Chicago, Rock Island and Pacific Railroad | 10 | 4790–4799 | Delivered without dynamic brakes. Later became Illinois Central Gulf 6040-6049. Rebuilt with dynamic brakes by EMD. Six are in service with the Wisconsin and Southern Railroad. | ||
Seaboard Coast Line Railroad | 36 | 8040–8066, 8087–8094, 8130 | Delivered in Family Lines Paint, to Seaboard System, now in service with CSX Transportation. | ||
St. Louis–San Francisco Railway | 8 | 950–957 | Merged with Burlington Northern in 1980, renumbered BN 6840-6847 - same numbers in BNSF. Now in service with the BNSF Railway. | ||
Soo Line Railroad | 57 | 757–789, 6600–6623 | Most are now in service with Canadian Pacific Kansas City, 6623 is the last SD40-2 built in the United States. | ||
Norfolk and Western Railway | 163 | 1625–1635, 1636–1652, 6073–6138, 6139–6188, 6189–6207 | 1625-1635 were delivered with high short hoods; many are still in service with Norfolk Southern. 1637 was damaged beyond repair in a collision in Sandersville, Georgia in 2015 and was later scrapped. | ||
Southern Railway | 128 | 3201–3328 | All orders were high hoods. Some sold to Canadian Pacific and converted into B-units. Many are now in service with Norfolk Southern. Many have been rebuilt in 2012-2016 with low short hood 'Admiral' cabs. | ||
Union Pacific Railroad | 686 | 3123–3239, 3243–3304, 3335–3399, 3410–3583, 3609–3808, 8000–8002, 8035–8099 | Several have been renumbered and others retired to leasers. 3200–3410 delivered with snoot noses. 3105 donated to RailGiants Train Museum along with a boxcar and a bay-window caboose and now sits on UP 4014's former spot. | ||
Southern Pacific Railroad | 229 | 8230–8299, 8300–8329, 8327–8341, 8350–8371, 8377–8391, 8489–8573 | Model EMD SD40T-2. 8300 series featured extended "snoot" noses for radio control equipment. 8278 was damaged beyond repair in the 1989 Cajon Pass runaway and sold for parts, then scrapped. | ||
Denver and Rio Grande Western Railroad | 73 | 5341–5413 | Model EMD SD40T-2. All with 81 in. or 88 in. short noses; No. 5371 was donated and restored at the Utah State Railway Museum at Ogden Utah. No. 5401 is preserved at the Colorado Railroad museum. | ||
St. Louis Southwestern Railway | 10 | 8322–8326, 8372–8376 | Model EMD SD40T-2. All built with extended noses for radio control equipment. | ||
Canadian SD40-2 orders | |||||
Railroad | Quantity | Road numbers | Notes | ||
Algoma Central Railway | 6 | 183–188 | Remaining units became WC 6002-6006 after the Wisconsin Central took over the Algoma Central. Later in service with Canadian National Railway. All retired. | ||
British Columbia Railway | 17 | 751–767 | Purchased after complications arose from safety concerns on a recent order of MLW M630Ws. 767 is the last SD40-2 built in Canada in July 1985. | ||
Canadian Pacific Railway | 486 | 5565-5879, 5900-6069, 9000-9024, 5560(:2), 5583(:2), 5584(:2), 5693(:2) | Units 9000-9024 are GMD SD40-2F. Four additional new units were built to replace wrecked units. Some units were retired or sold to leasing firms. Now in service with Canadian Pacific Kansas City. | ||
Canadian National Railway | 123 | 5241–5363 | Model SD40-2W. Several were delivered without dynamic brakes. These units have the Canadian Safety Cab with 4 windows. | ||
Ontario Northland Railway | 8 | 1730–1737 | These are the only SD40-2s built by GMD London without dynamic brakes. | ||
Quebec, North Shore and Labrador Railway | 44 | 221–264 | Four engines now serve the short-line Wellsboro & Corning Railroad in northern Pennsylvania, hauling sand cars to support Marcellus shale hydraulic fracturing in the region. | ||
Export SD40-2 orders | |||||
Railroad | Quantity | Road numbers | Notes | ||
Chemin de Fer Boké (Guinea) | 3 | 107–109 | Meter gauge 1,000 mm (3 ft 3+3⁄8 in) | ||
Estrada de Ferro Carajás (Brazil) | 29 | 401–429 | Constructed by Equipamentos Villares S.A. (EVSA) and built to Irish Gauge (1,600 mm (5 ft 3 in)) specifications. 429 is the very last SD40-2 constructed in October 1989. | ||
Ferrocarriles Unidos del Sureste (Mexico) | 4 | 601–604 | The only SD40-2s in México without dynamic brakes. | ||
Ferrocarriles Nacionales de México (Mexico) | 103 | 8700–8798, 13001–13004 | 13004 is the last SD40-2 built for México in February 1986. | ||
RFFSA (Brazil) | 36 | 3711–3747 | The only SD40-2s constructed in Europe for a Brazilian customer in Irish Gauge (1,600 mm (5 ft 3 in)) by Material y Construcciones S.A. (MACOSA). | ||
Mauritania Railway | 21 | CC101–CC121 | SDL40-2 variant for operating in high temperatures. |
Variants
SD40T-2
![](Https://upload.wikimedia.org/wikipedia/commons/thumb/6/64/SP_8238_CA_Caliente.jpg/220px-SP_8238_CA_Caliente.jpg)
A variant of the SD40-2 was created for several western railroads for extended periods in tunnels and snow sheds. Originally purchased by Southern Pacific and Rio Grande railroads, these were transferred to the Union Pacific Railroad in 1996. They have since found their way into the used locomotive market and many have been sold to regional railroads around the U.S.
British Rail Class 59
Another variant of the SD40-2 was created for Foster Yeoman, a British quarrying and aggregates company, which features a unique body design specifically for the European railway markets. Designated as Class 59 the initial production batch of four locomotives entered service in 1986.
SD40-2W
![](Https://upload.wikimedia.org/wikipedia/commons/thumb/8/8c/CN_SD40-2W_5321.jpg/200px-CN_SD40-2W_5321.jpg)
The GMD SD40-2(W) is a Canadian-market version of the SD40-2 diesel-electric locomotive, built for the Canadian National Railway (CN) by the Diesel Division of General Motors of Canada Ltd. (formerly General Motors Diesel) of London, Ontario; 123 were constructed between May 1975 and December 1980.[citation needed]
SD40-2F
The EMD SD40-2F was a locomotive operated by Canadian Pacific Railway. It is essentially an SD40-2 with a full cowl hood. CP was the only buyer, buying 25 units, numbered 9000-9024. Most have been scrapped, but 10 were sold to the Central Maine and Quebec Railway. When CP acquired CMQ in 2020, the 10 SD40-2Fs became CP's once again. One unit was rebuilt to a hydrogen fuel cell locomotive in 2021-2022.
Rebuilds
A number of SD40-2s have been rebuilt into other models. Some of the most unusual are the metre gauge BB40-2s for use in Brazil. [citation needed]
Conversely, several other models of EMD locomotive have sometimes been rebuilt to SD40-2 standards, including the SD40, SD45 and SD45-2. Normally, this consists of electrical upgrades (-2) and replacing the 20-cylinder prime mover with a 16-cylinder version, often built for GE Capital in Poland using EMD's manufacturing drawings and specifications. An outgrowth of this may be GE Transportation's second-sourcing of EMD repair parts. [citation needed]
The unusually troublesome SD50 have also been rebuilt into the equivalent of SD40-2s, rather than scrapping them. The 645F block and crankshaft are inherently good designs (indeed, the lessons learned with the 645F became part of the 710G); lowering the rating from 3,500 horsepower (2,600 kW) at 950 rpm to 3,000 horsepower (2,200 kW) at 900 rpm solved the mechanical and electrical reliability issues. [citation needed]
SD40N
Union Pacific has rebuilt 486 of their SD40-2's into SD40N's at their Jenk's shop. These units received a microprocessor control system to increase adhesion, control options, and extend the life of the locomotive.[2][3]
SD40-3
The Dash 3 suffix is not part of any official lineup, and is a loose designation for rebuilt Dash 2 series EMDs among several different railroads.
One example of an SD40-3 rebuild program is the one conducted by CSX at its Huntington, WV Shops. It started in 2010 with 10 units upgraded and numbered 4000-4009; in 2011, 20 units went through the program and were numbered 4010-4029 and in 2012 another 20 units followed and were numbered 4030-4049. One of the most notable rebuilds was SD40-2 8888, which in 2001 was involved in a runaway incident caused by the failure of the engineer to notice the train gradually accelerating during yard switching.[4] These locomotives feature new cabs, air conditioning systems, and other new technologies.
Norfolk Southern also has an ongoing SD40-3 rebuild program as of 2023. [5]
SD22ECO
The SD22ECO is an EMD SD40-2 or similar, repowered with an EMD 8-710-ECO engine. The resulting locomotive is rated at 2,150 horsepower (1,600 kW), and meets EPA Tier II emissions regulations.[6]
SD30C-ECO
The SD30C-ECO is an EMD SD40-2 re-powered with an EMD 12-710 prime mover. The locomotive is rated at 3,000 horsepower (2,200 kW) and meets EPA Tier 0 emissions regulations.[7] A similar rebuild, the SD40E3 was carried out by CSX in early 2017. [8]
ET23DCM
![](Https://upload.wikimedia.org/wikipedia/commons/thumb/b/b3/ET23DCM-SD23T4-locomotive.jpg/220px-ET23DCM-SD23T4-locomotive.jpg)
The ET23DCM is an EMD SD40-2 rebuilt by Wabtec, and repowered with a GE Evolution Series Inline 6 cylinder prime mover. This locomotive meets the EPA Tier 4 emission standards. CSX has ordered 15 locomotives, and Wabtec constructed one demonstrator locomotive.[9]
Preservation
Union Pacific donated SD40-2 9950 to Western America Railroad Museum in Barstow, California in 2004. 9950 was built in 1980 for the Missouri Pacific as their 3320.[citation needed]
In June 2009, Union Pacific had donated 3028 (former Chicago & North Western 6847) to the Illinois Railway Museum in Union, Illinois. The unit still wears its original factory paint from when it was built for the CNW in March, 1974. CNW 6847 was patched by UP in February, 2003, to UP 3028, and retired in December, 2008.[10]
In 2014, Union Pacific traded SD40-2C 3105 and other equipment to the RailGiants Train Museum at Fairplex in Pomona, California for 4-8-8-4 Union Pacific 4014 "Big Boy", which UP restored to operational status in 2019. Locomotive 3105 was originally built in 1979 as Missouri Pacific 6027, and one of the few that the Missouri Pacific ordered with dynamic braking.[11] This is the only operational locomotive in the museum.
In the Fall of 2018, Canadian Pacific donated SD40-2 5903 to the Canadian Railway Museum in Delson, Quebec, making it the first SD40-2 to be preserved in Canada. [citation needed]
In June 2020, Norfolk Southern donated SD40-2 6162 to the Kentucky Steam Heritage Corp. 6162 was originally built for the Norfolk and Western in 1978 as N&W 6162.[12]
In 2022, Dieselmotive of California saved Milwaukee Road SD40-2 156 from scrap and had it moved to the Oklahoma Railway Museum. Built as Milwaukee Road 3026 in 1972, the locomotive was one of 90 SD40-2s on the MILW roster, outnumbering all other diesel models. Later renumbered as MILW 156, it was painted as Milwaukee Road's Bicentennial unit in 1975 for the two-year celebration that began the following year. It wore that paint job for just a few years before being repainted back into MILW orange and black. It ended up in New England in the 2010s. The museum plans to restore the locomotive back into its Bicentennial paint scheme, as well as make it fully operational again.[13]
See also
- List of GM-EMD locomotives
- List of GMD Locomotives
- EMD GT26CW-2, export variant
References
- ^ Gerald L. Foster (1996). A Field Guide to Trains of North America. Houghton Mifflin Harcourt. pp. 56–57. ISBN 0-395-70112-0.
- ^ Craig, R. "Union Pacific Motive Power". The Diesel Shop. Archived from the original on 28 December 2023. Retrieved 2024-03-15.
- ^ "Union Pacific Locomotive Roster". Up.com. Archived from the original on 4 January 2024. Retrieved 15 March 2024.
- ^ Ross, Jim (2015-09-26). "New power from old: CSX locomotive rebuild program preserves jobs in Huntington, WV". The State Journal. Archived from the original on 2015-08-30. Retrieved 2015-04-10.
- ^ "The last grimy few: Norfolk Southern high hoods". 18 July 2023. Retrieved 4 April 2024.
- ^ "New 710ECO Repower Products Provide High Performance for Low and Medium Horsepower Applications" (PDF). www.emdisels.com. Archived from the original on 18 July 2009. Retrieved 27 August 2009.
- ^ "Canadian Pacific orders additional SD30C-ECOs". Trains. 10 February 2015. Retrieved 16 February 2015. (subscription required)
- ^ Gunnoe, Chase (February 1, 2017). "CSX takes delivery of first SD40E3 'Eco' units NEWSWIRE". Trains. Archived from the original on June 9, 2021.
- ^ Guss, Chris (1 November 2022). "ET23DCM locomotives explained". Trains. Archived from the original on 30 September 2023. Retrieved 12 January 2023.
- ^ "IRM acquires an EMD SD40-2". Illinois Railway Museum. Retrieved June 22, 2009.
- ^ "After 52 Years, No. 4014 Poised to Return to Rails". Union Pacific. 10 January 2014. Archived from the original on 15 January 2014. Retrieved January 10, 2014.
- ^ "Kentucky Steam Acquires Norfolk Southern SD40-2 Locomotive". Kentucky Steam Heritage Corp. 18 June 2020. Archived from the original on 22 September 2023. Retrieved June 19, 2020.
- ^ Berger, Eric (4 April 2023). "Milwaukee Road Bicentennial SD40-2 Saved in Oklahoma". Railfan & Railroad Magazine. Archived from the original on 5 April 2023.
External links
External image | |
---|---|
![]() |