![]() Yutu rover on lunar surface | |
Mission type | Lunar rover |
---|---|
Operator | CNSA osrg |
COSPAR ID | 2013-070C |
Mission duration | 3 months (planned)[1] Actual: 973 days Immobile since 25 January 2014, 42 days after landing. |
Spacecraft properties | |
Manufacturer | SASEI and BISSE |
Landing mass | 140 kg (310 lb)[2] |
Dimensions | 1.5 m (4.9 ft) |
Power | • Solar panels for electricity • Radioisotope heater units for heating |
Start of mission | |
Launch date | 1 December 2013, 17:30[3] | UTC
Rocket | Long March 3B Y-23 |
Launch site | Xichang LC-2 |
Deployed from | Chang'e 3 |
End of mission | |
Declared | 3 August 2016 |
Last contact | Mid-2016 |
Lunar rover | |
Landing date | 14 December 2013, 13:12 UTC[4] |
Landing site | Mare Imbrium 44°07′N 19°31′W / 44.12°N 19.51°W[5] |
Distance driven | 114.8 m (377 ft)[6] |
Yutu (Chinese: 玉兔; pinyin: Yùtù; lit. 'Jade Rabbit') was a robotic lunar rover that formed part of the Chinese Chang'e 3 mission to the Moon. It was launched at 17:30 UTC on 1 December 2013, and reached the Moon's surface on 14 December 2013.[7] The mission marks the first soft landing on the Moon since 1976 and the first rover to operate there since the Soviet Lunokhod 2 ceased operations on 11 May 1973.[8]
The rover encountered operational difficulties toward the end of the second lunar day[9] after surviving and recovering successfully from the first 14-day lunar night.[10] It was unable to move after the end of the second lunar night, though it continued to gather useful information for some months afterward.[11] In October 2015, Yutu set the record for the longest operational period for a rover on the Moon.[12] On 31 July 2016, Yutu ceased to operate after a total of 31 months, well beyond its original expected lifespan of three months.
In total, while working on the Moon, the rover was able to travel a distance of 114 meters.[13]
In 2018 the follow-on to the Yutu rover, the Yutu-2 rover, launched as part of the Chang'e 4 mission.
History
![Full scale mock-up of Yutu rover](Https://upload.wikimedia.org/wikipedia/commons/thumb/9/91/%E7%8E%89%E5%85%94%E5%8F%B7%E6%9C%88%E7%90%83%E8%BD%A6%EF%BC%881%EF%BC%9A1%EF%BC%89.jpg/220px-%E7%8E%89%E5%85%94%E5%8F%B7%E6%9C%88%E7%90%83%E8%BD%A6%EF%BC%881%EF%BC%9A1%EF%BC%89.jpg)
The Yutu lunar rover was developed by Shanghai Aerospace System Engineering Institute (SASEI) and Beijing Institute of Spacecraft System Engineering (BISSE). The development of the six-wheeled rover began in 2002 and was completed in May 2010.[14][15][16] The rover deployed from the lander and explored the lunar surface independently. The rover's name was selected in an online poll, and is a reference to the pet rabbit of Chang'e, the goddess of the Moon in Chinese mythology.[16]
Objectives
The official mission objective was to achieve China's first soft-landing and roving exploration on the Moon, as well as to demonstrate and develop key technologies for future missions.[17]
The scientific objectives of Chang'e-3 mainly included lunar surface topography and geological survey, lunar surface material composition and resource survey, Sun-Earth-Moon space environment detection, and lunar-based astronomical observation.[17] Chang'e 3 performed the first direct radar measurement of the structure and depth of the lunar soil down to a depth of 30 m (98 ft), and investigated the lunar crust structure down to several hundred meters deep.[18]
The Chinese Lunar Exploration Program was divided into three main operational phases:[17]
Specifications
Unlike NASA and ESA, the China National Space Administration reveals little about its missions to the public, so detailed information about Chang'e 3 is limited. Aspects of Yutu's design and several of its experiments may have been based on NASA's Mars Exploration Rovers.[19][20] Its wheel design is believed to have been considerably influenced by what was used on the Russian Lunokhod 1 rover.[20]
The Yutu rover has a mass of 140 kg (310 lb), with a payload capacity of 20 kg (44 lb).[1][2][21] It is smaller than the Mars Exploration Rovers, Spirit and Opportunity, and carries similar instruments: panoramic cameras, an infrared spectrometer and an alpha particle X-ray spectrometer (APXS).[8][22] Yutu is also equipped with a robotic arm to position its APXS near a target sample. In addition, the rover could transmit live video, and has automatic sensors to prevent it from colliding with other objects.
Yutu was designed to explore an area of 3 square kilometres (1.2 sq mi) during its three-month mission, with a maximum travelling distance of 10 km (6.2 mi). Energy was provided by two solar panels, allowing the rover to operate through lunar days. During the 14-day lunar nights, the rover went into sleep mode,[23] during which heating was provided by radioisotope heater units (RHU) using plutonium-238[24] and two-phase fluid loops.[17]
Scientific payload
The Yutu rover carried a ground-penetrating radar and spectrometers to inspect the composition of the soil and the structure of the lunar crust beneath it.
Ground-penetrating radar (GPR)
The rover carried a ground-penetrating radar (GPR) on its underside, allowing for the first direct measurement of the structure and depth of the lunar soil down to a depth of 30 m (98 ft), and investigation of the lunar crust structure down to several hundred metres deep.[18]
Spectrometers
The rover carried an alpha particle X-ray spectrometer (APXS)[22] and an infrared spectrometer, intended to analyze the chemical element composition of lunar samples. The APXS was the only payload on the robotic arm.[25]
Stereo cameras
There were two panoramic cameras and two navigation cameras on the rover's mast, which stands ~1.5 m (4.9 ft) above the lunar surface, as well as two hazard avoidance cameras installed on the lower front portion of the rover.[26] Each camera pair was used to capture stereoscopic images,[27] or for range imaging by triangulation.
Landing site
![](Https://upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Chang%27e-3_lunar_landing_site.jpg/280px-Chang%27e-3_lunar_landing_site.jpg)
![](Https://upload.wikimedia.org/wikipedia/commons/thumb/0/06/Sinus_Iridum%2C_Chang%27e_3_%26_Lunokhod_1_landing_sites.png/280px-Sinus_Iridum%2C_Chang%27e_3_%26_Lunokhod_1_landing_sites.png)
![](Https://upload.wikimedia.org/wikipedia/commons/thumb/a/a9/Chang%27e_3_landing_site.png/280px-Chang%27e_3_landing_site.png)
Chang'e 3 landed on 14 December 2013 and deployed the Yutu rover 7 hours 24 minutes later.[28]
The planned landing site was announced to be Sinus Iridum.[29] However, the lander descended on Mare Imbrium, about 40 km (25 mi) south of the 6 km (3.7 mi) diameter crater Laplace F,[30][31] at 44.1214°N, 19.5116°W (2640 m elevation)[32]
Operations
![Boulders near Ziwei crater. Image captured by Yutu rover](Https://upload.wikimedia.org/wikipedia/commons/thumb/1/11/Chang%27e_3_-_rocks_near_Ziwei_crater.jpg/280px-Chang%27e_3_-_rocks_near_Ziwei_crater.jpg)
First lunar day
The rover was successfully deployed from the lander and made contact with the lunar surface on 20:35 UTC, 14 December 2013.[33] On 17 December 2013, it was announced that all of the scientific instruments except the spectrometers were successfully activated, with both the lander and rover "functioning as hoped, despite the unexpectedly rigorous conditions of the lunar environment".[2] From 16 December 2013 to 20 December 2013, the rover remained immobile as its systems were partially powered down. Direct solar radiation raised the temperature on the exposed side of the rover to over 100 °C, while the shaded side simultaneously fell below 0 °C.[34]
By 22 December 2013, Yutu had completed its initial science mission: to photograph the lander from several different angles, following a roughly semi-circular route from north to south of the lander, while also being photographed and filmed at the same time by the lander. A number of these images have been released, including a stereoscopic view of the lander and videos of the rover in motion. The lander and rover then commenced their respective science missions.[27][35][36]
In addition to successfully deploying its robotic arm, Yutu completed diagnostic checks on 23 December 2013 to ensure that it was prepared for the upcoming lunar night, and moved about 40 metres south of the lander.[37] The lander also commenced diagnostics the following day. The lander first entered a low-power state at around 11:00 am, UTC+8 on 25 December 2013, later executed by the rover at 5:23 am on 26 December 2013 to conserve power as no sunlight will be received by the lander and rover's solar panels for 14 consecutive days. Both had to withstand the extreme cold of the two-week-long lunar nights.[23][38]
Second lunar day
On 11 January 2014, following the lunar night, the rover exited sleep mode[10] and completed its first lunar soil inspection on 16 January 2014.[39] On 25 January 2014, near the end of the second lunar day, China's state media announced that the rover had undergone a "mechanical control abnormality", as caused by the "complicated lunar surface environment".[9] The Planetary Society reported that the rover was not responding to commands from Earth correctly, rendering it unable to "prepare for the oncoming night properly."[40][41][42][43] It later became evident that the rover suffered a control circuit malfunction in its driving unit, which prevented it from entering normal dormancy and folding its mast and solar panels.[44][45]
Third lunar day
On 12 February 2014, Command Control listened for all transmissions from Yutu after enduring its second lunar night. Failure of communication attempts caused it to be declared permanently inoperative.[46] On 13 February, it unexpectedly re-established communication with Command Control.[47][48][49] China's lunar program spokesman Pei Zhaoyu declared that although Yutu was able to communicate, "it still suffers a mechanical control abnormality," rendering it immobile.[11]
The rover entered its third hibernation period on 22 February 2014 and continued to remain immobile, while serious technical difficulties persisted, further hampering science operations.[50] Chinese space scientists eventually ascertained that the control circuit had failed, and this prevented Yutu from entering normal dormancy as planned,[43][44] but stated that the GPR, panoramic and infrared imaging equipment were still functioning normally.[50][51]
14th lunar day
While amateur observers were unable to detect transmissions from the lander, Chinese officials reported that the craft was still operating its UV Camera and Telescope as it entered its 14th lunar night on 14 January 2015.[52][53] On 18 April 2014, Wang Jianyu, deputy secretary general of the Chinese Society of Space Research stated that the failure was not mechanical, but electrical, and they were looking to bypass it. He also explained, "The temperature on the Moon is considerably lower than our previous estimation", adding that "certain components may be suffering from 'frostbite'".[54]
Yutu's solar panel alignment motors failed to respond, causing its solar panels to remain fully deployed as opposed to its planned insulating position to conserve heat as it entered low-power mode, exposing its internal electronics to the Moon's harsh outer environment. As Yutu progressed through consequent lunar nights, it lost certain capabilities,[55] but successfully exceeded its expected three-month operating life.[56] Yutu's scientific instruments may be functioning, but subsequent science data were very limited as the NIR spectrometer and the ground-penetrating radar were limited to the same observation as it was immobile. Mission Control planned to extend Yutu's mission until it ceased to communicate, as it would provide valuable data on its components' endurance to the lunar environment.[56]
The rover remained operational in December 2015 and continued to transmit data every lunar day.[57][58][59]
By the end of October 2015, Yutu had set the record for the longest operational period of a rover on the Moon, though most of its time was spent immobile.[60]
End of mission
On 3 August 2016, it was reported that the rover had ceased to communicate with Chang'e 3 despite attempts to reestablish transmissions, effectively ending the mission.[61][62]
Discoveries
The rover's ground penetrating radar found evidence for a minimum of nine distinct rock layers, indicating that the area had surprisingly complex geological processes and is compositionally distinct from the Apollo and Luna landing sites.[63][64]
During 15 April 2014, the Chang'e 3 mission, including its Yutu rover, witnessed a total eclipse of the Sun by the Earth from the surface of the Moon.[65]
See also
- Chinese Lunar Exploration Program
- Yutu-2 rover
- List of artificial objects on the Moon
- List of missions to the Moon
- Lunar rover
- Rover (space exploration)
References
- ^ a b Laxman, Srinivas (7 March 2012). "Chang'e-3: China To Launch First Moon Rover In 2013". Asian Scientist.
- ^ a b c "Most Chang'e-3 science tools activated". xinhuanet. 18 December 2013. Archived from the original on 18 December 2013.
- ^ Zhang (13 March 2012). "China Starts Manufacturing Third Lunar Probe". CRI. Archived from the original on 21 October 2013.
- ^ Knapp, Alex (30 November 2013). "China Will Kick Off December By Launching A Probe To The Moon". Forbes. Archived from the original on 14 December 2013.
- ^ "Chang'e-3 soft-lands on moon". xinhuanet. 14 December 2013. Archived from the original on 17 December 2013.
- ^ "China's Chang'e 4 probe switches back to dormant mode". China Daily. 13 February 2019.
- ^ "China lands Jade Rabbit robot rover on Moon". BBC. 14 December 2013.
- ^ a b Molnár, László (24 May 2013). "Chang'e-3 revealed – and its massive!". Pull Space Technologies. Archived from the original on 6 June 2017. Retrieved 9 December 2013.
- ^ a b "China's first moon rover has experienced a "mechanical control abnormality". Australian Broadcasting Corporation. 26 January 2014.
- ^ a b Boyle, Alan (12 January 2014). "Chinese moon lander and rover wake up after weeks of sleep". NBC News. Archived from the original on 14 January 2014.
- ^ a b McKirdy, Euan (13 February 2014). "Down but not out: Jade Rabbit comes back from the dead". CNN.
- ^ Jeff Foust (30 October 2015). "China's Immobile Rover Passes a Purely Figurative Milestone". SpaceNews.
- ^ China Focus: China's upgraded lunar rover drives on moon's far side
- ^ 登月车构造原理 [Lunar vehicle structure principle] (in Chinese). 新华网. 24 April 2008. Archived from the original on 27 February 2009.
- ^ 中国首辆登月车工程样机 [China's first lunar landing vehicle engineering prototype vehicles] (in Chinese). 新华网. 24 April 2008. Archived from the original on 27 February 2009.
- ^ a b Ramzy, Austin (26 November 2013). "China to Send 'Jade Rabbit' Rover to the Moon". The New York Times.
- ^ a b c d SUN, ZeZhou; JIA, Yang; ZHANG, He (November 2013). "Technological advancements and promotion roles of Chang'e-3 lunar probe mission". Science China. 56 (11): 2702–2708. Bibcode:2013ScChE..56.2702S. doi:10.1007/s11431-013-5377-0. S2CID 111801601. Archived from the original (PDF) on 29 March 2014. Retrieved 25 December 2013.
- ^ a b 欧阳自远:嫦娥三号明年发射将实现着陆器与月球车联合探测 [Ouyang: Chang E III launch next year will achieve lander and rover joint probe] (in Chinese). Xinhua. 14 June 2012. Archived from the original on 17 June 2012.
- ^ Covault, Craig (November 2013). "China's bold lunar plan" (PDF). Aerospace America (American Institute of Aeronautics and Astronautics). Archived from the original (PDF) on 5 March 2016.
- ^ a b Chen, Stephen (25 October 2013). "Chinese lunar rover looks too much like Nasa's Opportunity, say scientists". South China Morning Post.
- ^ "China considering manned lunar landing in 2025–2030". Xinhua. 24 May 2009. Archived from the original on 31 May 2009.
- ^ a b "嫦娥三号"发射成功 将于5天后到达月球 [Chang'e III will be successful launch 5 days to reach the moon] (in Chinese). Netease. 2 December 2013. paragraph "月兔"将巡天观地测月. Archived from the original on 13 December 2013. Retrieved 9 December 2013.
- ^ a b "Moon rover Yutu sleeps as night comes". Xinhua. 26 December 2013. Archived from the original on 31 December 2013.
- ^ McNutt, Ralph L. Jr. (January 2014). "Radioisotope Power Systems: Pu-238 and ASRG status and the way forward" (PDF). Johns Hopkins University. Archived (PDF) from the original on 28 March 2014.
- ^ Peng, W.X.; Wang, H.Y. (2014). Active Particle-induced X-ray Spectrometer for CHANG'E-3 YuTu Rover Mission and its first results (PDF). 45th Lunar and Planetary Science Conference (2014).
- ^ "Chang'e 3". SPACEFLIGHT101. Retrieved 2 December 2013.
- ^ a b Lakdawalla, Emily (23 December 2013). "Chang'e 3 update with lots of pictures: Yutu begins lunar journey". The Planetary Society. Archived from the original on 26 December 2013.
- ^ O'Neil, Ian (14 December 2013). "China's Rover Rolls! Yutu Begins Moon Mission". Discovery News. CCTV. Archived from the original on 3 March 2016. Retrieved 15 December 2013.
- ^ "Chang'e 3 Diary". Zarya. 6 December 2013. Archived from the original on 29 November 2014. Retrieved 9 December 2013.
- ^ "Chang'e 3 landing coordinates". China News. 14 December 2013.
- ^ Lakdawalla, Emily; Stooke, Phil (December 2013). "Chang'e 3 has successfully landed on the Moon!". The Planetary Society.
- ^ "NASA Images of Chang'e 3 Landing Site". NASA. 30 December 2013. Archived from the original on 2 January 2014. Retrieved 1 January 2014.
- ^ "Yutu Rover "Jade Rabbit" separates from lander on the Moon". Youtube. 14 December 2013.
- ^ "China's Yutu "naps", awakens and explores". xinhuanet. 20 December 2013. Archived from the original on 24 December 2013.
- ^ "Lander and rover ready to perform exploration tasks". CNTV. 22 December 2013. Archived from the original on 25 December 2013. Retrieved 24 December 2013.
- ^ "玉兔" 月球车机械臂投放测试成功 ["Rabbit" robotic rover launch test is successful]. China News (in Chinese). 23 December 2013.
- ^ Clark, Stephen (27 December 2013). "Chinese rover hibernating to survive frigid lunar night". Spaceflight Now.
- ^ "China's moon rover flexes muscles". Xinhua. 23 December 2013. Archived from the original on 31 December 2013.
- ^ "China's Jade Rabbit rover explores Moon soil". BBC News. BBC. 16 January 2014.
- ^ Lakdawalla, Emily (25 January 2014). "Bad news for Yutu rover". Planetary Society.
- ^ Wilfred, Chan (28 January 2014). "China's imperiled Jade Rabbit moon rover: 'Goodnight, humanity'". CNN. Archived from the original on 22 February 2014.
- ^ Perraudin, Frances (27 January 2014). "Beijing, we have a problem: China's first lunar rover, Jade Rabbit, signs off". The Guardian.
- ^ a b Shukman, David (27 January 2014). "China Moon rover Jade Rabbit in trouble". BBC News. BBC.
- ^ a b Staff (3 March 2014). "China Exclusive: Control circuit malfunction troubles China's Yutu". Xinhua. Archived from the original on 9 March 2014.
- ^ Lakdawalla, Emily (3 March 2014). "Brief Yutu update: Slightly more detail on what's keeping rover from roving". The Planetary Society.
- ^ "Jade Rabbit rover 'declared dead'". BBC News. 12 February 2014.
- ^ "China's Jade Rabbit lunar rover 'could be saved'". BBC. 13 February 2014.
- ^ Collins, Katie (13 February 2014). "It's alive! Welcome back, Jade Rabbit". Wired. Archived from the original on 5 March 2016.
- ^ Lakdawalla, Emily (12 February 2014). "Possible hope for Yutu: "Situation is getting better," but no details [UPDATED]". The Planetary Society.
- ^ a b Kremer, Ken (23 February 2014). "Yutu Moon Rover Starts 3rd Night Time Hibernation But Technical Problems Persist". Universe Today.
- ^ Cong, Wang (23 February 2014). "China Focus: Uneasy rest begins for China's troubled Yutu rover". Xinhua News. Archived from the original on 24 February 2014.
- ^ China's Chang'e 3 Lander in good Shape as 14th Lunar Night sets in spaceflight101.com
- ^ Howell, Elizabeth (9 September 2014). "China's Yutu rover is still alive, reports say, as lunar panorama released". Universe Today. PhysOrg. Retrieved 2 October 2014.
- ^ Chen, Stephen, Last-ditch efforts to salvage mission of China's stricken Jade Rabbit lunar rover, South China Morning Post, 18 April 2014.
- ^ Xinhua News Agency (29 May 2014). "Chinese lunar rover alive but weak". SpaceDaily.
- ^ a b Fan, Wang (2 April 2014). "Yutu still working after expected service span ended". China Daily. Retrieved 9 April 2014.
- ^ "Chinese lunar rover alive but weak". icrosschina.com. Archived from the original on 29 April 2015. Retrieved 16 June 2014.
- ^ "China's ailing moon rover weakening: designer". October 2014.
- ^ "China's moon rover Yutu functioning but stationary". Space Daily. 4 March 2015.
- ^ An (29 October 2015). "China's first moon rover sets record for longest stay". Xinhua. Archived from the original on 2 November 2015.
- ^ Aron, Jacob (3 August 2016). "China's Jade Rabbit moon rover dead after 31 months on surface". New Scientist. Retrieved 5 August 2016.
- ^ Stephen Clark (4 August 2016). "China's Yutu rover dies on the moon". Spaceflight Now. Retrieved 5 August 2016.
- ^ Wall, Mike (12 March 2015). "The Moon's History Is Surprisingly Complex, Chinese Rover Finds". Space.com. Retrieved 13 March 2015.
- ^ Xiao, Long (13 March 2015). "A young multilayered terrane of the northern Mare Imbrium revealed by Chang'E-3 mission". Science. 347 (6227): 1226–1229. Bibcode:2015Sci...347.1226X. doi:10.1126/science.1259866. PMID 25766228. S2CID 206561783.
- ^ "Solar Eclipse from the Moon". Authint Mail. 7 April 2014. Archived from the original on 13 April 2014.
External links
- Official coverage on China Central Television (English)
- Snapshots from Space at The Planetary Society website
- Chang'e 3 diary Archived 29 November 2014 at the Wayback Machine from zarya.info
- Chang'e 3 - Mission Overview at Spaceflight101
- (in Chinese)Panorama from Yutu panoramic camera (PCAM) at 720yun website