![A datailed picture of Audiocubes.](http://upload.wikimedia.org/wikipedia/commons/thumb/9/9b/Detailed_view_of_Audiocubes.jpg/300px-Detailed_view_of_Audiocubes.jpg)
AudioCubes are a collection of wireless intelligent light-emitting objects, capable of detecting each other's location, orientation, and user gestures. They were created by Bert Schiettecatte as electronic musical instruments for use by musicians in live performance, sound design, musical composition, and for creating interactive applications in max/msp, pd and C++.
The concept of AudioCubes was first presented by Schiettecatte in April 2004 at the CHI2004 conference in Vienna.[1] An initial prototype of AudioCubes was shown at the Museum for Contemporary Art, MUHKA in Antwerp in December 2004. AudioCubes were also featured in an art installation created in collaboration with Peter Swinnen during the Champ D’Action Time Canvas festival.[2]
In January 2007, AudioCubes were released to the commercial market[3] and offered for sale on the website of Percussa, a company Schiettecatte founded in October 2004 to promote AudioCubes.
Hardware architecture
Each AudioCube is identical, and has a small built-in computer which is able to detect the position and location of the other cubes in a network and measure the distances between them. AudioCubes also work without drivers and communicate using high speed HID.
An AudioCube has four onboard infrared sensors (one on each horizonal face) to communicate and measure distances to objects nearby, digital signal processors (DSP), a USB-rechargeable battery, and a translucent housing.
The bottom and top sides of each do not have any such sensors. Thus any distance driven arrangement of cubes is limited to a single horizontal (e.g. table top) level of interactivity. That is, the cubes are not typically stacked on top of each other.
MIDI and OSC compatibility
AudioCubes work wirelessly with MIDI-compatible software and hardware (e.g. FL Studio, Logic Pro, Reason, drum machines and Monome). A connection must be established using middleware such as MIDIBridge.
AudioCubes also come with an Open Sound Control (OSC) server to send and receive OSC data.[4]
Software Applications
Several applications have been created for use with AudioCubes, each with a different focus, such as sound design, music composition, live performance, or for creating applications in max/msp, pd and C++.
- MIDIBridge: sends/receives MIDI from/to other MIDI compatible software/hardware.
- DeckaBridge: specifically created to let AudioCubes work with the DJ software Deckadance.
- PluginWrapper: application to use VST-plugins together with the AudioCubes.
- Loopshaper: to make sounds and loops with one AudioCube.
- Modular: detects and communicates to a network of AudioCubes wirelessly, and reassembles data from a MIDI device.
- Improvisor: a generative MIDI step sequencer to create generative music using AudioCubes.
- Evolvor: generate complex LFO waveforms using AudioCubes (sound design).
- Flext external for Max/Msp: to create your own max patches for the AudioCubes.
- OSC server: sends information about the location, orientation, and sensor data of the AudioCubes to other OSC applications.
- SDK C++ library: to create your own applications for the AudioCubes.
- FM synthesizer for AudioCubes: creating sounds with AudioCubes without needing any additional hardware/software.
In addition, a number of Max/MSP patches were created to work with AudioCubes.
Software Uses
Live Performance
The AudioCubes can be used to send MIDI notes to MIDI compatible software/hardware using MIDIBridge. When two AudioCubes are put next to each other, they detect each other, and triggers are sent as MIDI notes. These triggers can then be used to control on/off type of signals, such as start and stop audio clips in a Digital Audio Workstation (DAW), such as Ableton Live. At each face of the cube, a different audio clip can be assigned in a DAW.
The AudioCubes can also measure distances to nearby objects or your hands when configured as a sensor cube in MIDIBridge.[5] In the same way, this sensor data is sent to the computer as a continuous controller (CC) which can be used to control parameters in the DAW. Since each cube has 4 sensors, up to 4 parameters can be controlled per AudioCube.
In addition, you can also control the RGB colors of the AudioCubes and use this information as feedback during a live performance. [5]
Sound Design
The sensors of the AudioCubes can also be used to shape sounds. By moving hands and fingers closer or further away from the 4 sensors, it generates 4 different MIDI CCs which can be sent to MIDI compatible instruments. When using an AudioCube in this way, it can be compared to a 4D optical theremin.
The AudioCubes can also be linked to LFOs by using the software application Evolvor. The LFO waveforms are designed in the graphical editors of Evolvor. Each AudioCube is then automatically linked to an LFO, because of the topology detection. LFO signals can be added and removed, by adding and removing AudioCubes. The signals can also be mixed and matched, by mixing and matching AudioCubes.
Music Composition
When using the Improvisor application, velocity as well as semitone patterns are automatically linked to every AudioCube. Every AudioCube plays the melody created by both patterns. When cubes are placed next to each other they can follow the same melody. In this way, music can be composed by mixing and rearranging AudioCubes.
Interactive Applications
Several tools have been created to make applications for the AudioCubes in max/msp, pure data, and C++.
Artists
AudioCubes have been used by some performers such as Mark Mosher,[6] Pearls for Swines, Richard Devine, Steve Baltes, Bostich from Nortec, Ilan Kriger, Arecio Smith, Julien Pauty, and the European Bridges Ensemble.[7]
Example of Tangible User Interface
AudioCubes are an example of a Tangible User Interface. In the past few years[when?] a lot of research has been done in the field of Tangible User Interfaces. The Reactable is another example of such an interface. It is an installation on which people can move around objects which are followed by a camera and projector on a surface.
Awards
For the creation of the AudioCubes, Bert Schiettecatte received in 2009 the prestigious Qwartz Electronic Music Awards in Paris. He was also invited to give a talk at TEDx Mediterranean in Cannes, September 2010.[8]
References
- ^ Schiettecatte, Bert (24 April 2004). Written at Vienna, Austria. Interaction Design for Electronic Musical Interfaces. CHI 2004 Conference on Human Factors in Computing Systems. New York, NY, USA: Association for Computing Machinery. p. 1549. doi:10.1145/985921.986125. ISBN 978-1-58113-703-3. Retrieved 15 May 2011.
- ^ "AudioCubes at MUHKA, Antwerp". www.percussa.com. 4 December 2004. Archived from the original on 17 May 2011. Retrieved 15 May 2011.
- ^ "AudioCubes at Namm 2007". www.percussa.com. 30 January 2007. Archived from the original on 3 October 2011. Retrieved 16 May 2011.
- ^ "Guide to Audiocubes | Sound Genetics". soundgenetics.com. 5 October 2020. Retrieved 20 September 2023.
- ^ a b Bentall, Robert (25 February 2019). "Composing". British Art Studies (11). doi:10.17658/issn.2058-5462/issue-11/composing. ISSN 2058-5462.
- ^ "Mark Mosher website". markmoshermusic.com. Archived from the original on 9 July 2023. Retrieved 15 May 2011.
- ^ "AudioCubes artists". www.percussa.com. Archived from the original on 29 April 2011. Retrieved 15 May 2011.
- ^ "AudioCubes designer @ TEDx Mediterranean". www.percussa.com. 2 November 2010. Archived from the original on 10 September 2015. Retrieved 21 January 2022.