OpenWebNet is a communications protocol developed by Bticino since 2000.
The OpenWebNet protocol allows a "high-level" interaction between a remote unit and Bus SCS of MyHome domotic system. The latest protocol evolution has been improved to allow interaction with well-known home automation systems like KNX and DMX512-A system, by using appropriate gateways.
The OpenWebNet protocol is disclosed on MyOpen community.
OpenWebNet Protocol
The protocol is thought to be independent from the used technology. For example, it is possible to use a supervisor software connected via Ethernet, via serial RS-232 or via USB to a gateway that is directly connected to a domotic system. One can require protocol message extension. It is enough to propose their own RFC. It will be examined and disclosed if it respects OpenWebNet syntax.
Syntax
An OpenWebNet message is structured with variable length fields separated by the special character '*' and closed by '##'.
The characters admitted in the fields are numbers and the character “#”.
The structure of a message is therefore:
- field1*field2*… *fieldN##
The following fields are admitted: WHO WHAT WHERE DIMENSION VALUE
WHO
It characterizes the domotic system function to which the OpenWebNet message is referred.
For example: WHO = 1, characterizes the messages for lighting system management.
WHAT
It characterizes an action to do or a status to read. For every WHO (and therefore for every function) there is a specific WHAT table.
The field WHAT can also contain optional parameters: WHAT#PAR1#PAR2… #PARn.
Example of actions: switch ON light, dimmer to 75%, switch DOWN shutter, radio ON, etc. Example of status: light ON, active alarm, battery unload, etc.
WHERE
It characterizes the set of objects to which the OpenWebNet message is referred. It can be a single object, a group of objects, a specific environment, the entire system, etc.
For every WHO (and therefore for every function) there is a specified WHERE table.
The tag WHERE can also contain optional parameters: WHERE#PAR1#PAR2… #PARn.
Example of where: all the lights of group 1, sensor 2 of zone 1 of alarm system, etc.
DIMENSION
Is a range of value that characterizes the dimension of the object to which the message is referred. For every WHO (and therefore for every function) there is a specific DIMENSION table.
It’s possible to require/to read/to write the value of one dimension. Every dimension has a prefixed number of values, described in VALUE field.
Example of dimension: sensor temperature, loudspeaker volume, firmware version of a device, etc.
VALUE
It characterizes the read/written value of a written/required/read dimension.
Message
There are 4 types of OpenWebNet Message:
- Command / Status Message
- Status Request Message
- Request/Read/Write Dimension Message
- Acknowledge Message
Command / Status Message
*WHO*WHAT*WHERE##
Status Request Message
*#WHO*WHERE##
Request/Read/Write Dimension Message Request:
*#WHO*WHERE*DIMENSION##
Read:
*#WHO*WHERE*DIMENSION*VALUE1*...*VALUEn##
Write:
*#WHO*WHERE*#DIMENSION*VALUE1*...*VALUEn##
Acknowledge Message ACK:
*#*1##
NACK:
*#*0##
Gateway OpenWebNet
It is possible to interact with the SCS home automation bus by using a specific gateway.
There are two typologies of gateways that allow a connection to the field bus by using different standard protocols:
Gateway Ethernet
The current implementation by BTicino is also an embedded web server. It works as a translator between OpenWebNet messages via TCP/IP and the SCS messages transmitted on the SCS bus.
It is possible to control three different kinds of buses:
The Ethernet gateway offers two modes of authentication:
- via a list of whitelisted IPAs
- using a nonce-type password exchange (see in the external links for code) (used on older devices)
- using a hmac based authentication algorithm (can be found in the documentation, external links) (used on newer devices)
Usually, the default port for the Ethernet gateway is 20000 even if the registered port for the protocol is 20005.
Gateway USB or RS-232
The gateway is an interface that works as a translator between the OpenWebNet messages transmitted on USB or serial and the SCS messages transmitted on the SCS bus.
Functions
WHO value | Function |
---|---|
0 | Scenario |
1 | Lighting |
2 | Automation |
3 | Load control |
4 | Temperature Control/Heating |
5 | Burglar Alarm/Intrusion |
6 | Door Entry System |
7 | Video Door Entry System/multimedia |
9 | Auxiliary |
13 | Gateway/interfaces management |
14 | Light+shutters actuators lock |
15 | CEN/Scenario Scheduler, switch |
16 | Sound System/Audio |
17 | Scenario programming |
18 | Energy Management |
24 | Lighting Management |
25 | CEN/Scenario Scheduler, buttons |
1000 | Diagnostic |
1001 | Automation diagnostic |
1004 | Thermoregulation diagnostic failures |
1013 | Device diagnostic |
WHERE value | Lighting Function |
---|---|
0 | General |
1÷9 | Room 1÷9 |
11÷99 | Light point 11÷99 |
#1÷#9 | Group 1÷9 |
Example
OpenWebNet message examples
Command Message
Switch Off of light 77
*1*0*77##
WHO = 1 WHAT = 0 WHERE = 77
Status Message
Scenario 1 of scenario unit 23 activated.
*0*1*23##
WHO = 0 WHAT = 1 WHERE = 23
Request status message
Status request of probe 1
*#4*1##
WHO = 4 WHERE = 1
Request Dimension Message
Request of Temperature Measured, probe 44
*#4*44*0##
WHO = 4 WHERE = 44 DIMENSION = 0
Read Dimension Message
Temperature Measured, probe 44
*#4*44*0*0251*2##
WHO = 4 WHERE = 44 DIMENSION = 0 VALUE1 = 0251 (T=+25,1 °C) VALUE2 = 2 (System in "cooling mode")
Write Dimension Message
Volume set at 50%, environment 2
*#16*#2*#1*16*##
WHO = #16 WHAT = #2 WHERE = #1 DIMENSION = 1 VALUE1 = 16
See also
References
- Moneta, D. Mauri, G. Bettoni, C. Meda, R. - Cesi ricerca (Italy) https://web.archive.org/web/20110706133239/http://www.cired.be/CIRED07/pdfs/CIRED2007_0522_paper.pdf Test Facility for the assessment of local energy management systems; 19th Conference on Electricity Distribution, Vienna (21–24 May 2007).
- Moneta, D. Bisone, L. Mauri, G. Meda, R. - Cesi ricerca (Italy) https://ieeexplore.ieee.org/document/4209527/;jsessionid=961A3F8772A9F5137915F077D02C56FB?tp=&arnumber=4209527&isnumber=4209049 New interactions between LV customers and the network: further possibilities for home automation functions ; IEEE International Conference on Robotics and Automation, Rome (10–14 April 2007).
- Bonino, D. Castellina, E. Corno, F. - Politecnico di Torino (Italy) http://www.cad.polito.it/pap/db/ictai08.pdf[permanent dead link] DOG: an Ontology-Powered OSGi Domotic Gateway; Torino (September 2008).
External links
- MyOpen Bticino
- IANA, TCP ports assignment. OpenWebNet is associated to port 20005, but uses by default the port 20000
- Documentation
- Password exchange code