Palladium hydride is palladium metal with hydrogen within its crystal lattice. Despite its name, it is not an ionic hydride but rather an alloy of palladium with metallic hydrogen that can be written PdHx. At room temperature, palladium hydrides may contain two crystalline phases, α and β (also called α′). Pure α-phase exists at x < 0.017 while pure β-phase exists at x > 0.58; intermediate x values correspond to α-β mixtures.[1]
Hydrogen absorption by palladium is reversible and therefore has been investigated for hydrogen storage.[2] Palladium electrodes have been used in some cold fusion experiments, under the theory that hydrogen can be "squeezed" between palladium atoms to help it fuse at lower temperatures than normal.
History
The absorption of hydrogen gas by palladium was first noted by T. Graham in 1866 and absorption of electrolytically produced hydrogen, where hydrogen was absorbed into a palladium cathode, was first documented in 1939.[2] Graham produced an alloy with the composition PdH0.75.[3]
Making palladium hydride
The hydrogen atoms occupy interstitial sites in palladium hydride. The H-H bond in H2 is cleaved. The ratio in which H is absorbed on Pd is defined by . When Pd is brought into a H2 environment with a pressure of 1 atm, the resulting concentration of H reaches x ~ 0.7. However, the concentration of H to obtain superconductivity is higher, in the range x > 0.75.[4] This is done via three different routes, with measures to prevent the ready desorption of the hydrogen from the palladium.
The first route is loading from gas phase. A Pd sample is placed into a high-pressure cell of H2, at room temperature. The H2 is added through a capillary. To maintain the high absorption, the pressure cell is cooled to liquid N2 temperature (77 K). The resulting concentration may be as high as [H]/[Pd] = 0.97.[4]
The second route is electrochemical bonding. This is a method where the critical concentration for superconductivity can easily be exceeded without using a high-pressure environment, via a reaction as equilibrium between H in an electrochemical phase and H in a solid phase. The hydrogen is added to Pd and Pd–Ni alloys by an H concentration of ~0.95.[4] Thereafter, it has been loaded into electrolysis of 0.1n-H2SO4 with a current density of 50 to 150 mA/cm3. Finally, after lowering the loading temperature to ~ 190 K, a H concentration of x ~ 1 has been reached.[4]
The third route is known as ion implantation. Before the implantation of H ions into Pd, the Pd foil was pre-charged with H. This is done in H2 high-temperature gas. This shortens the implantation time which follows. The concentration reached is about x ~ 0.7.[4] Afterwards the foil is cooled to a temperature of 77 K to prevent a loss of H before the implantation can take place. The implantation of H in PdHx happens at a temperature of 4 K. The H ions penetrate in an H2+-beam. This results in a high concentration layer of H in a Pd foil.[4]
Chemical structure and properties
Palladium is sometimes metaphorically called a "metal sponge" (not to be confused with literal metal sponges) because it soaks up hydrogen "like a sponge soaks up water". At standard temperature and pressure, palladium can absorb up to 900 times its own volume of hydrogen.[5] Hydrogen can be absorbed into the metal hydride and then desorbed back out for thousands of cycles. Researchers look for ways to extend the useful life of palladium storage.[6]
Size effect
The absorption of hydrogen produces two different phases, both of which contain palladium metal atoms in a face-centered cubic (fcc, rocksalt) lattice, which is the same structure as pure palladium metal. At low concentrations up to PdH0.02 the palladium lattice expands slightly, from 388.9 pm to 389.5 pm. Above this concentration the second phase appears with a lattice constant of 402.5 pm. Both phases coexist until a composition of PdH0.58 when the alpha phase disappears.[1] Neutron diffraction studies have shown that hydrogen atoms randomly occupy the octahedral interstices in the metal lattice (in an fcc lattice there is one octahedral hole per metal atom). The limit of absorption at normal pressures is PdH0.7, indicating that about 70% of the octahedral holes are occupied. When x=1 is reached, the octahedral interstices are fully occupied.[7] The absorption of hydrogen is reversible, and hydrogen rapidly diffuses through the metal lattice. Metallic conductivity reduces as hydrogen is absorbed, until at around PdH0.5 the solid becomes a semiconductor.[3]
This formation of the bulk hydride does depend on the size of the catalyst Pd. When Pd becomes smaller than 2.6 nm, hydrides are not formed anymore.[7]
Hydrogen dissolved in the bulk differ from hydrogen dissolved on the surface. When the particles of palladium decrease in size, less hydrogen dissolves in these smaller pd particles. Therefore, relatively more hydrogen adsorbs on the surface of the small particles. This hydrogen adsorbed onto the particles do not form an hydride. Therefore, bigger particles have more places available for the formation of hydrides.[7]
Electron and phonon band
The most important property of the band structure of PdH(oct) is that filled Pd states are lowered with the presence of hydrogen. Also, the lowest energy levels, which are the bonding states, of PdH are lower than that of Pd.[8]
Additionally, empty Pd states, that are below the fermi energy, are also lowered with the presence of H.[8]
Palladium prefers to be with hydrogen due to the interaction between the s state of hydrogen and the p states of palladium. The energy of an independent H atom lies in the energy range of the dominating p-states of the Pd bands.[8]
Therefore, these empty states under the fermi-energy and holes in the d-band are filled.[8]
Additionally, the hydride formation raises the fermi level above the d band. Empty states, above the d-band, are also filled. This results in filled p-states and shifts the ‘edge’ to a higher energy level.[9]
Superconductivity
PdHx is a superconductor with a transition temperature Tc of about 9 K for x = 1. (Pure palladium is not superconducting.) Drops in resistivity vs. temperature curves were observed at higher temperatures (up to 273 K) in hydrogen-rich (x ~ 1), nonstoichiometric palladium hydride and interpreted as superconducting transitions.[10][11][12] These results have been questioned[13] [failed verification] and have not been confirmed thus far.
A great advantage of palladium hydride over many other hydride systems is that palladium hydride does not need to be highly pressurized to become superconducting.[4] This makes measurements easier and gives more opportunity for different kinds of measurements (many superconducting materials require extreme pressure in order to superconduct, on the order of 100 GPa).[4] Palladium hydride could therefore also be used to explore the role that hydrogen plays in these hydride systems being superconductors.
Susceptibility
One of the magnetic properties of Palladium hydride is susceptibility. The susceptibility of PdHx varies largely when changing the concentration of H.[4] This is due to the 𝛽-phase of PdHx. The 𝛼-phase of PdH lies in the same range of the fermi surface as Pd itself, therefore 𝛼-phase does not influence the susceptibility.[4] However, the 𝛽-phase of PdHx is characterized by s-electrons filling the d-band. Therefore, the susceptibility of the 𝛼-𝛽 mixture decreases at room temperature with an increasing concentration of H.[4] Finally, when the spin fluctuations of pure Pd are decreased, the superconductivity will occur.[4]
Specific heat capacity
Another metallic property is the electronic heat coefficient 𝛾. This coefficient depends on the density of states. For pure Pd the heat coefficient is 9.5 mJ(mol∙K^2).[4] When H is added to the pure Pd, the electronic heat coefficient drops. For the range of x=0.83 to x=0.88 𝛾 is observed to be six times smaller than for pure Pd.[4] This region is the superconducting region. However, Zimmerman et al. also measured the heat coefficient 𝛾 for a concentration of x=0.96.[4] A broadening of the superconducting transition was observed at this concentration. One of the reasons for this could be explained by an inhomogeneity of the macroscopic structure of PdHx.[4] 𝛾 at this value of x has a large fluctuation and is therefore uncertain.
The critical concentration for superconductivity to happen is estimated at x ~ 0.72.[4] The critical temperature or the superconducting transition temperature is estimated at 9 K. This was achieved at a stoichiometric concentration of x = 1.
Pressure also influences the critical temperature. It is shown that an increase in the pressure on PdHx decreases Tc. This can be explained by a hardening of the phonon spectrum, which includes a decrease in the electron-phonon constant 𝜆 .[4]
Surface absorption process
The process of absorption of hydrogen has been shown by scanning tunnelling microscopy to require aggregates of at least three vacancies on the surface of the crystal to promote the dissociation of the hydrogen molecule.[14] The reason for such a behaviour and the particular structure of trimers has been analyzed.[15]
Uses
The absorption of hydrogen is reversible and is highly selective. A palladium-based diffuser separator is used, although they are not employed industrially.[16] Impure gas is passed through tubes of thin walled silver-palladium alloy as protium and deuterium readily diffuse through the alloy membrane. The gas that comes through is pure and ready for use. Palladium is alloyed with silver to improve its strength and resistance to embrittlement. To ensure that the formation of the beta phase is avoided, as the lattice expansion noted earlier would cause distortions and splitting of the membrane, the temperature is maintained above 300°C.[3]
Another use of palladium hydride is increased adsorption of H2-molecules with respect to pure palladium. In 2009, a study was conducted which tested this fact.[17] At a pressure of 1 bar, the probability was measured of Hydrogen molecules sticking to the surface of Palladium versus the probability of sticking to surface of palladium hydride. The sticking probability of Palladium was found to be greater at temperatures where the phase of the used Palladium and hydrogen mixture was pure β-phase, which is in this context corresponds to palladium hydride (at 1 bar this means temperatures greater than roughly 160 degrees Celsius), as opposed to temperatures where β- and α-phases coexist and even lower temperatures where there is pure α-phase (α-phase here corresponds to a solid solution of Hydrogen atoms in Palladium). Knowing these sticking probabilities enables one to calculate the rate of adsorption by virtue of the equation
where is the aforementioned sticking probability and is the flux of Hydrogen molecules in the toward the surface of the Palladium/Palladium-hydride.
When the system is in a steady state, we must have that the rate of adsorption and, oppositely, the rate of desorption () are equal. This gives
The rate of desorption is assumed to be given by a Boltzmannian distribution, i.e.
(*)
where is some unknown constant, is the desorption energy, is Boltzmann's constant and is the temperature.
The relation (*) can be fitted to find the value of . It was found that, within the uncertainty of their experiment, the values for of Palladium and Palladium hydride respectively were roughly equal. Thus palladium hydride has as higher average adsorption rate than Palladium, while the energy required for desorption is the same.
Density functional theory was performed to find an explanation for this fact. It was found that the bond of hydrogen with the palladium hydride surface is weaker than the bond with the palladium surface and that the desorption activation barrier is lower by a small amount for Palladium hydride than for palladium, although the adsorption barriers are comparable in magnitude. Moreover, the heat of adsorption is lower for palladium hydride than for Palladium, which leads to lower equilibrium surface coverage of H. This means that the surface of palladium hydride would be less saturated, which leads to greater opportunity for sticking, i.e. a higher sticking probability.
The reversible absorption of palladium is a means to store hydrogen, and the above findings indicate that even in the hydrogen-absorbed state of palladium, there is further opportunity for hydrogen storing.
See also
References
- ^ a b Manchester, F. D.; San-Martin, A.; Pitre, J. M. (February 1994). "The H-Pd (hydrogen-palladium) System". Journal of Phase Equilibria. 15 (1): 62–83. doi:10.1007/BF02667685. S2CID 95343702.
- ^ a b Grochala, Wojciech; Edwards, Peter P. (March 2004). "Thermal Decomposition of the Non-Interstitial Hydrides for the Storage and Production of Hydrogen". Chemical Reviews. 104 (3): 1283–1316. doi:10.1021/cr030691s. PMID 15008624.
- ^ a b c Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. pp. 1150–151. ISBN 978-0-08-037941-8.
- ^ a b c d e f g h i j k l m n o p q r Kawae, Tatsuya; Inagaki, Yuji; Wen, Si; Hirota, Souhei; Itou, Daiki; Kimura, Takashi (15 May 2020). "Superconductivity in Palladium Hydride Systems". Journal of the Physical Society of Japan. 89 (5): 051004. Bibcode:2020JPSJ...89e1004K. doi:10.7566/JPSJ.89.051004. hdl:2324/7172285.
- ^ Ralph Wolf; Khalid Mansour. "The Amazing Metal Sponge: Soaking Up Hydrogen" Archived 2015-11-16 at the Wayback Machine. 1995.
- ^ "Extending the Life of Palladium Beds" Archived 2015-10-31 at the Wayback Machine.
- ^ a b c Tew, Min Wei; Miller, Jeffrey T.; van Bokhoven, Jeroen A. (27 August 2009). "Particle Size Effect of Hydride Formation and Surface Hydrogen Adsorption of Nanosized Palladium Catalysts: L 3 Edge vs K Edge X-ray Absorption Spectroscopy". The Journal of Physical Chemistry C. 113 (34): 15140–15147. doi:10.1021/jp902542f.
- ^ a b c d Setayandeh, S. S.; Webb, C. J.; Gray, E. MacA. (1 December 2020). "Electron and phonon band structures of palladium and palladium hydride: A review". Progress in Solid State Chemistry. 60: 100285. doi:10.1016/j.progsolidstchem.2020.100285. S2CID 225592643.
- ^ Davis, R. J.; Landry, S. M.; Horsley, J. A.; Boudart, M. (15 May 1989). "X-ray-absorption study of the interaction of hydrogen with clusters of supported palladium". Physical Review B. 39 (15): 10580–10583. Bibcode:1989PhRvB..3910580D. doi:10.1103/PhysRevB.39.10580. PMID 9947864. S2CID 13476324.
- ^ Tripodi, Paolo; Di Gioacchino, Daniele; Borelli, Rodolfo; Vinko, Jenny Darja (May 2003). "Possibility of high temperature superconducting phases in PdH". Physica C: Superconductivity. 388–389: 571–572. Bibcode:2003PhyC..388..571T. doi:10.1016/S0921-4534(02)02745-4.
- ^ Tripodi, Paolo; Di Gioacchino, Daniele; Vinko, Jenny Darja (August 2004). "Superconductivity in PdH: phenomenological explanation". Physica C: Superconductivity. 408–410: 350–352. Bibcode:2004PhyC..408..350T. doi:10.1016/j.physc.2004.02.099.
- ^ Tripodi, Paolo; Di Gioacchino, Daniele; Vinko, Jenny Darja (2007). "A review of high temperature superconducting property of PdH system". International Journal of Modern Physics B. 21 (18&19): 3343–3347. Bibcode:2007IJMPB..21.3343T. doi:10.1142/S0217979207044524.
- ^ Baranowski, B.; Dębowska, L. (June 2007). "Remarks on superconductivity in PdH". Journal of Alloys and Compounds. 437 (1–2): L4–L5. doi:10.1016/j.jallcom.2006.07.082.
- ^ Mitsui, T.; Rose, M. K.; Fomin, E.; Ogletree, D. F.; Salmeron, M. (April 2003). "Dissociative hydrogen adsorption on palladium requires aggregates of three or more vacancies". Nature. 422 (6933): 705–707. Bibcode:2003Natur.422..705M. doi:10.1038/nature01557. PMID 12700757. S2CID 4392775.
- ^ Lopez, Nuria; Łodziana, Zbigniew; Illas, Francesc; Salmeron, Miquel (29 September 2004). "When Langmuir Is Too Simple: H 2 Dissociation on Pd(111) at High Coverage". Physical Review Letters. 93 (14): 146103. Bibcode:2004PhRvL..93n6103L. doi:10.1103/PhysRevLett.93.146103. hdl:2445/13263. PMID 15524815. S2CID 4809736.
- ^ Häussinger, Peter; Lohmüller, Reiner; Watson, Allan M. (2011). "Hydrogen, 3. Purification". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.o13_o04. ISBN 978-3-527-30385-4.
- ^ Johansson, M.; Skúlason, E.; Nielsen, G.; Murphy, S.; Nielsen, R.M.; Chorkendorff, I. (April 2010). "Hydrogen adsorption on palladium and palladium hydride at 1bar". Surface Science. 604 (7–8): 718–729. Bibcode:2010SurSc.604..718J. doi:10.1016/j.susc.2010.01.023.
External links
- Grashoff, G. J.; Pilkington, C. E.; Corti, C. W. (1 October 1983). "The Purification of Hydrogen" (PDF). Platinum Metals Review. 27 (4): 157–169.
- Altunoglu, Abdulkadir (1994). Hydrogen Permeation Through Nickel And Nickel Alloys: Surface Reactions And Trapping (Thesis). doi:10.21954/ou.ro.00004d82.
- Breger, V.; Gileadi, E. (1 February 1971). "Adsorption and absorption of hydrogen in palladium". Electrochimica Acta. 16 (2): 177–190. doi:10.1016/0013-4686(71)80001-4.