![]() Full-scale mock-up of BEAM at Johnson Space Center | |
Module statistics | |
---|---|
COSPAR ID | 2016-024A [1] |
Launch date | 8 April 2016, 20:43:31 UTC[2] |
Launch vehicle | Falcon 9 Full Thrust (SpaceX CRS-8) |
Berthed | 16 April 2016, 09:36 UTC [3] Tranquility aft |
Unberthed | 2028 (planned) |
Mass | 1,413 kg (3,115 lb) [4] |
Length | 4.01 m (13.2 ft) [5] |
Diameter | 3.23 m (10.6 ft) |
Pressurised volume | 16.0 m3 (570 cu ft) |
The Bigelow Expandable Activity Module (BEAM) is an experimental expandable space station module developed by Bigelow Aerospace, under contract to NASA, for testing as a temporary module on the International Space Station (ISS) from 2016 to at most 2028, when the contract can not be further extended. It arrived at the ISS on 10 April 2016,[6] was berthed to the station on 16 April 2016, and was expanded and pressurized on 28 May 2016. Although originally planned to be a two year test, it has exceeded expectations and is used as additional cargo storage. The module is under ownership of NASA after Bigelow Aerospace suspended operations in 2021.
History
NASA originally considered the idea of inflatable habitats in the 1960s, and developed the TransHab inflatable module concept in the late 1990s. The TransHab project was canceled by Congress in 2000,[7][8][9] and Bigelow Aerospace purchased the rights to the patents developed by NASA to pursue private space station designs.[10] In 2006 and 2007, Bigelow launched two demonstration modules to Earth orbit, Genesis I and Genesis II.[11][12]
NASA re-initiated analysis of expandable module technology for a variety of potential missions beginning in early 2010.[13][14] Various options were considered, including procurement from commercial provider Bigelow Aerospace, for providing what in 2010 was proposed to be a torus-shaped storage module for the International Space Station. One application of the toroidal BEAM design was as a centrifuge demo preceding further developments of the NASA Nautilus-X multi-mission exploration concept vehicle.[15] In January 2011, Bigelow projected that the BEAM module could be built and made flight-ready 24 months after a build contract was secured.[16]
![](https://upload.wikimedia.org/wikipedia/commons/thumb/e/e3/Bigelow_Expandable_Activity_Module_at_Bigelow%E2%80%99s_facility_in_Las_Vegas.jpg/290px-Bigelow_Expandable_Activity_Module_at_Bigelow%E2%80%99s_facility_in_Las_Vegas.jpg)
On 20 December 2012, NASA awarded Bigelow Aerospace a US$17.8 million contract to construct the Bigelow Expandable Activity Module (BEAM) under NASA's Advanced Exploration Systems (AES) Program.[17][18] Sierra Nevada Corporation built the US$2 million Common Berthing Mechanism under a 16-month firm-fixed-price contract awarded in May 2013.[19] NASA plans made public in mid-2013 called for a 2015 delivery of the module to the ISS.[19]
In 2013, it was planned that at the end of BEAM's mission, it would be removed from the ISS and burn up during reentry.[20]
During a press event on 12 March 2015, at the Bigelow Aerospace facility in North Las Vegas, Nevada, the completed ISS flight unit, compacted and with two Canadarm2 grapple fixtures attached, was displayed for the media.[21]
In December 2021, Bigelow transferred ownership of BEAM to NASA's Johnson Space Center.[22] With the cessacion of Bigelow Aerospace activities, NASA contracted ATA Engineering, a former Bigelow subcontractor, for engineering support on the BEAM.[23]
Deployment and status
![](https://upload.wikimedia.org/wikipedia/commons/thumb/8/85/BEAM_module_expansion_series.jpg/290px-BEAM_module_expansion_series.jpg)
In early 2015, BEAM was scheduled for deployment on the next available ISS transport vehicle, SpaceX CRS-8, which was scheduled for launch in September 2015. Due to a rocket failure during the SpaceX CRS-7 launch in June 2015, the delivery of BEAM was delayed.[24][25] The successful launch of SpaceX CRS-8 took place on 8 April 2016,[26] and the Dragon cargo vehicle was berthed to the nadir port of Harmony node on 10 April 2016.[27] On 16 April 2016, British astronaut Tim Peake extracted BEAM from Dragon's trunk using Canadarm2, and installed it on the aft port of Tranquility node.[28]
The first attempt at module inflation took place on 26 May 2016, and was suspended after higher-than-expected air pressure inside BEAM was detected with minimal expansion of the module.[29] The attempt was terminated after two hours.[30] The failure to expand and unfold may be the result of the unanticipated 10-month delay in module inflation, which may have caused the fabric layers to stick together.[29] The module was expanded on 28 May 2016 over the course of seven hours, with air being injected 25 times for a total of 2 minutes 27 seconds.[31] Its length was extended 170 cm (67 in) from its stowed configuration, 2.5 cm (0.98 in) less than expected.[32] After expansion was complete, air tanks aboard BEAM were opened to equalize air pressure in the module with that of the ISS.[33] The module was originally to be monitored for two years.[32][33]
On 6 June 2016, astronaut Jeff Williams and cosmonaut Oleg Skripochka opened the hatch to BEAM and entered to collect an air sample, download expansion data from sensors, and install monitoring equipment. The hatch to BEAM was re-sealed on 8 June 2016 after three days of tests.[34][35] A second round of tests took place on 29 September 2016 when astronaut Kathleen Rubins entered the module to install temporary monitoring equipment.[36]
NASA noted in May 2017 that, after spending one year in space, the BEAM instrumentation had recorded "a few probable micrometeoroid debris impacts" but that the module's protective layers had resisted penetration. Early results from monitors inside the module have shown that galactic cosmic radiation levels are comparable to those in the rest of the space station. Further testing will try to characterize whether the inflatable structure is any more resilient to radiation than traditional metal modules.[37][38]
In October 2017, it was announced that the module would stay attached to the ISS until 2020, with options for two further one-year extensions. The module will be used to store up to 130 cargo transfer bags to make available space aboard the station.[39] The ISS crew began work in November 2017 to prepare BEAM for use as storage space.[40]
In July 2019, an engineering assessment certified BEAM's ability to remain attached to the station until 2028, as it has exceeded performance expectations and become a core cargo storage module on the volume-constrained station. A contract extension will be required to allow BEAM to serve its extended operational lifetime.[41]
With the suspension of all activities at Bigelow Aerospace, development on BEAM has ended. Engineering support passed to Bigelow subcontractor ATA Engineering in 2022, who will not continue development.[42]
Objectives
The BEAM is an experimental program in an effort to test and validate expandable habitat technology.[43] If BEAM performs favorably, it could lead to development of expandable habitation structures for future crews traveling in deep space.[44] The two-year demonstration period will:[43][45]
- Demonstrate launch and deployment of a commercial inflatable module. Implement folding and packaging techniques for inflatable shell. Implement a venting system for inflatable shell during ascent to ISS.
- Determine radiation protection capability of inflatable structures.
- Demonstrate design performance of commercial inflatable structure like thermal, structural, mechanical durability, long term leak performance, etc.
- Demonstrate safe deployment and operation of an inflatable structure in a flight mission.
Characteristics
![](https://upload.wikimedia.org/wikipedia/commons/thumb/6/60/ISS-47_BEAM_installation_%281%29.jpg/290px-ISS-47_BEAM_installation_%281%29.jpg)
BEAM is composed of two metal bulkheads, an aluminium structure, and multiple layers of soft fabric with spacing between layers, protecting an internal restraint and bladder system;[46] it has neither windows nor internal power.[47] The module was expanded about a month after being attached by its Common Berthing Mechanism to the space station. It was inflated from its packed dimensions of 2.16 m (7 ft 1 in) long and 2.36 m (7 ft 9 in) in diameter to its pressurized dimensions of 4.01 m (13.2 ft) long and 3.23 m (10.6 ft) in diameter.[5] The module has a mass of 1,413 kg (3,115 lb),[4] and its interior pressure is 101.3 kPa (14.69 psi), the same as inside of the ISS.[48]
BEAM's internal dimensions provide 16.0 m3 (570 cu ft) of volume where a crew member will enter the module three to four times per year to collect sensor data, perform microbial surface sampling, conduct periodic change-out of the radiation area monitors, and inspect the general condition of the module.[49][46] The hatch to the module will otherwise remain closed.[50] Its interior is described as being "a large closet with padded white walls", with various equipment and sensors attached to two central supports.[51]
Radiation shielding
The flexible Kevlar-like materials of construction are proprietary.[52][53] The multiple layers of flexible fabric and closed-cell vinyl polymer foam[54] in the BEAM structural shell are expected to provide impact protection (see Whipple shield) as well as radiation protection, but model calculations need to be validated by actual measurements.[46]
In a 2002 NASA study, it was suggested that materials that have high hydrogen contents, such as polyethylene, can reduce primary and secondary radiation to a greater extent than metals, such as aluminium.[55] Vinyl polymer may also be used in laboratories and other applications for radiation shield garments.[56]
BCSS airlock
In 2013, Bigelow mentioned a concept to build a second BEAM module for use as an airlock on its planned Bigelow Commercial Space Station. The module's inflatable nature would provide room for up to three crew or tourists to spacewalk simultaneously, compared with a maximum of two that can operate outside the ISS.[57]
Gallery
-
Interior of BEAM mock-up
-
BEAM development unit undergoing burst test
-
BEAM being loaded into SPACEX Dragon's trunk in February 2016
See also
References
- ^ "Display: SpaceX CRS-8 2026-024A". NASA. 14 May 2020. Retrieved 31 January 2021.
This article incorporates text from this source, which is in the public domain.
- ^ "Launch Log". Jonathan's Space Report. Retrieved 1 February 2021.
- ^ @Space_Station (16 April 2016). "#BEAM is attached to the station at 5:36am ET, a huge step for expandable habitats in space and our #JourneyToMars" (Tweet). Retrieved 27 April 2016 – via Twitter.
- ^ a b "SpaceX CRS-8 Mission Overview" (PDF). NASA. Retrieved 26 April 2016.
This article incorporates text from this source, which is in the public domain.
- ^ a b Grush, Loren (5 April 2016). "How expandable astronaut habitats could pave the way for private space hotels". The Verge. Retrieved 26 April 2016.
- ^ Pearlman, Robert (10 April 2016). "SpaceX Dragon Arrives at Space Station, Delivers Inflatable Room Prototype". Space.com. Retrieved 11 April 2016.
- ^ "National Aeronautics and Space Administration Authorization Act of 2000". Library of Congress. 106th Congress. 24 January 2000. Retrieved 26 May 2007.[permanent dead link]
This article incorporates text from this source, which is in the public domain.
- ^ Sensenbrenner, F. James (12 September 2000). "National Aeronautics and Space Administration Authorization Act of 2000, Conference Report". Library of Congress. 106th Congress. Archived from the original on 2 December 2008. Retrieved 10 June 2007.
This article incorporates text from this source, which is in the public domain.
- ^ Abbey, George W. S. (27 February 2001). "Letter from NASA JSC Center Director: Actions Required to Address ISS Budget Challenges". NASA via SpaceRef.com. Archived from the original on 2 February 2013. Retrieved 10 June 2007.
- ^ Seedhouse, Erik (2014). Bigelow Aerospace: Colonizing Space One Module at a Time. Springer-Praxis. p. 8. doi:10.1007/978-3-319-05197-0. ISBN 978-3-319-05197-0.
- ^ David, Leonard (12 July 2006). "Exclusive: Bigelow Orbital Module Launched into Space". Space.com. Retrieved 26 April 2016.
- ^ Ledford, Heidi (5 July 2007). "Second space 'hotel' model launched". Nature. doi:10.1038/news070702-13. Retrieved 26 April 2016.
- ^ Marks, Paul (3 March 2010). "NASA turned on by blow-up space stations". New Scientist. Archived from the original on 7 March 2019. Retrieved 3 March 2010.
- ^ Sang, Tony; Spexarth, Gary (26 May 2010). "A New Space Enterprise of Exploration: Inflatable Module Mission" (PDF). NASA. Archived (PDF) from the original on 7 March 2019.
This article incorporates text from this source, which is in the public domain.
- ^ Lindsey, Clark S. (28 January 2011). "NASA NAUTILUS-X: multi-mission exploration vehicle includes centrifuge, which would be tested at ISS". HobbySpace.com. Archived from the original on 19 April 2011.
- ^ David, Leonard (26 January 2011). "International Space Station Could Get Private Inflatable Room". Space.com. Archived from the original on 10 September 2012. Retrieved 31 January 2011.
- ^ "NASA Contract to Bigelow Aerospace". NASA via SpaceRef.com. 11 January 2013. Archived from the original on 16 February 2013. Retrieved 18 January 2013.
- ^ "NASA to Test Bigelow Expandable Module on Space Station". NASA. 16 January 2013. Archived from the original on 20 January 2013. Retrieved 18 January 2013.
This article incorporates text from this source, which is in the public domain.
- ^ a b Leone, Dan (12 June 2013). "Sierra Nevada Corp. To Build ISS Berthing Hardware for Bigelow Module". SpaceNews. Retrieved 14 August 2019.
- ^ Marks, Paul (16 January 2013). "NASA buys blow-up habitat for space station astronauts". New Scientist. Archived from the original on 12 April 2016. Retrieved 24 August 2017.
- ^ Webb, Carlyle (12 March 2015). "New Expandable Addition on Space Station to Gather Critical Data for Future Space Habitat Systems". NASA.
This article incorporates text from this source, which is in the public domain.
- ^ "Engineering Services for the Bigelow Expandable Activity Module (BEAM)". sam.gov. 10 December 2021. Archived from the original on 12 December 2021. Retrieved 12 December 2021.
- ^ Jeff Foust (21 January 2022). "Bigelow Aerospace transfers BEAM space station module to NASA". Space News.
- ^ Bergin, Chris (7 September 2015). "SpaceX conducts additional Falcon 9 improvements ahead of busy schedule". NASASpaceFlight.com. Retrieved 26 April 2016.
- ^ "Launch Log". Spaceflight Now. 8 April 2016. Archived from the original on 22 April 2016.
- ^ Graham, William (8 April 2016). "SpaceX return Dragon to space as Falcon 9 nails ASDS landing". NASASpaceFlight.com. Retrieved 26 April 2016.
- ^ Kremer, Ken (11 April 2016). "SpaceX Dragon Carrying New Inflatable Room Captured and Mated to Space Station". Universe Today. Retrieved 26 April 2016.
- ^ Clark, Stephen (16 April 2016). "Expandable room installed on space station". Spaceflight Now. Retrieved 26 April 2016.
- ^ a b Wall, Mike (27 May 2016). "NASA Will Try to Pump Up Inflatable Space Station Room Again Saturday". Space.com. Retrieved 31 May 2016.
- ^ Duhaime-Ross, Arielle (27 May 2016). "NASA's first expandable habitat failed to inflate on the ISS because of friction". The Verge. Retrieved 2 June 2016.
- ^ Garcia, Mark (28 May 2016). "BEAM Expanded To Full Size". NASA. Archived from the original on 6 February 2019. Retrieved 3 June 2016.
This article incorporates text from this source, which is in the public domain.
- ^ a b Smith, Marcia S. (28 May 2016). "BEAM Successfully Expanded". SpacePolicyOnline.com. Retrieved 3 June 2016.
- ^ a b Foust, Jeff (28 May 2016). "BEAM module fully expanded on space station". SpaceNews. Retrieved 3 June 2016.
- ^ Huot, Daniel G. (6 June 2016). "BEAM Open for the First Time". NASA. Retrieved 19 June 2016.
This article incorporates text from this source, which is in the public domain.
- ^ Garcia, Mark (8 June 2016). "BEAM Closed as Crew Packs Spaceships for Departure". NASA. Retrieved 1 October 2016.
This article incorporates text from this source, which is in the public domain.
- ^ Garcia, Mark (29 September 2016). "BEAM Open Today for Tests". NASA. Retrieved 1 October 2016.
This article incorporates text from this source, which is in the public domain.
- ^ Mahoney, Erin (26 May 2017). "First Year of BEAM Demo Offers Valuable Data on Expandable Habitats". NASA. Retrieved 20 June 2017.
This article incorporates text from this source, which is in the public domain.
- ^ Berger, Eric (28 May 2017). "Inflatable space habitat passes first hurdle, now on to radiation testing". Ars Technica. Retrieved 20 June 2017.
- ^ Berger, Eric (3 October 2017). "NASA tries an inflatable room on the space station, likes it". Ars Technica. Retrieved 4 October 2017.
- ^ Garcia, Mark (21 November 2017). "BEAM Work and Vision Checks for Crew Today". NASA. Retrieved 29 January 2018.
This article incorporates text from this source, which is in the public domain.
- ^ Foust, Jeff (12 August 2019). "NASA planning to keep BEAM module on ISS for the long haul". SpaceNews. Retrieved 14 August 2019.
- ^ "SpaceX's Raptor 2 is Revealed!". TMRO News. TMRO. 26 January 2022.
- ^ a b "Bigelow Expandable Activity Module (BEAM)". Bigelow Aerospace. NASA. 16 March 2016. Retrieved 3 April 2016.
This article incorporates text from this source, which is in the public domain.
- ^ "Bigelow Expandable Activity Module". NASA. Retrieved 28 March 2016.
This article incorporates text from this source, which is in the public domain.
- ^ "BEAM: The Experimental Platform". Bigelow Aerospace. Retrieved 26 April 2016.
- ^ a b c Mahoney, Erin (17 July 2015). "BEAM Facts, Figures, FAQs". NASA. Retrieved 3 April 2016.
This article incorporates text from this source, which is in the public domain.
- ^ Lieberman, Bruce (September 2015). "The Future of Construction in Space". Air & Space/Smithsonian. Retrieved 27 April 2016.
- ^ Seppala, Timothy J. (25 March 2016). "NASA to use the ISS as a testbed for inflatable living modules". Engadget. Retrieved 26 April 2016.
- ^ Robison, Jennifer (16 January 2013). "North Las Vegas-based Bigelow Aerospace lands US$17.8 million NASA contract". Las Vegas Review-Journal. Archived from the original on 16 February 2013. Retrieved 19 January 2013.
- ^ Vastag, Brian (16 January 2013). "International space station to receive inflatable module". The Washington Post. Archived from the original on 17 February 2013. Retrieved 24 August 2017.
- ^ Dreier, Hannah (17 January 2013). "Space station to get US$18 million balloon-like room". Associated Press. Archived from the original on 14 April 2013. Retrieved 19 January 2013.
- ^ US patent US 7204460 B2, Bigelow, Robert T., "Orbital debris shield", published 2007-04-17, issued 2007-04-17.
- ^ Lyle, Karen H.; Vassilakos, Gregory J. (November 2015). Modeling of Local BEAM Structure for Evaluation of MMOD Impacts to Support Development of a Health Monitoring System (PDF) (Report). NASA Langley. NASA/TM-2015-218985. Archived (PDF) from the original on 17 April 2022.
This article incorporates text from this source, which is in the public domain.
- ^ Seedhouse, Erik (2014). Bigelow Aerospace: Colonizing Space One Module at a Time. Springer-Praxis. p. 26. doi:10.1007/978-3-319-05197-0. ISBN 978-3-319-05197-0.
A middle layer was a closed-cell vinyl foam for radiation protection and thermal insulation
- ^ "Understanding Space Radiation" (PDF). NASA Facts. NASA Johnson. October 2002. FS-2002-10-080-JSC. Archived from the original (PDF) on 30 October 2004. Retrieved 3 April 2016.
This article incorporates text from this source, which is in the public domain.
- ^ Murphy, Marina (15 November 2002). "Lightweight radiation-proof fabric unveiled". New Scientist. Retrieved 26 April 2016.
- ^ Franzen, Carl (17 January 2013). "Inflatable Spacecraft's Other Goal: Space Walks For Tourists". Talking Points Memo. Archived from the original on 16 February 2013. Retrieved 19 January 2013.
External links
- BEAM at BigelowAerospace.com
- BEAM at NASA.gov
- BEAM installation animation on YouTube
- BEAM expansion time lapse on YouTube
- Astronaut Jeff Williams Enters BEAM Inflatable Module at ISS on YouTube