Reverted good faith edits by 117.120.18.132 (talk): Non-neutral opinion. (TW) |
117.120.18.132 (talk) No edit summary |
||
Line 5: | Line 5: | ||
[[File:Steel ruler closeup.jpg|thumb|180px|A closeup of a steel rule]] |
[[File:Steel ruler closeup.jpg|thumb|180px|A closeup of a steel rule]] |
||
A '''ruler''', sometimes called a '''rule''' or '''line gauge''', is an [[Measuring instrument|instrument]] used in [[geometry]], [[technical drawing]], [[printing]] and engineering/building to measure distances and/or to rule straight lines. Strictly speaking, the ''ruler'' is essentially a [[straightedge]] used to '''rule''' lines{{Citation needed|date=May 2010}}, but typically the ruler also contains calibrated lines to measure distances.<ref>[http://dictionary.reference.com/browse/ruler Dictionary.com definition]</ref> |
A '''ruler''', sometimes called (by uneducated people) a '''rule''' or '''line gauge''', is an [[Measuring instrument|instrument]] used in [[geometry]], [[technical drawing]], [[printing]] and engineering/building to measure distances and/or to rule straight lines. Strictly speaking, the ''ruler'' is essentially a [[straightedge]] used to '''rule''' lines{{Citation needed|date=May 2010}}, but typically the ruler also contains calibrated lines to measure distances.<ref>[http://dictionary.reference.com/browse/ruler Dictionary.com definition]</ref> |
||
==Types== |
==Types== |
Revision as of 02:44, 25 May 2012
![](https://upload.wikimedia.org/wikipedia/commons/thumb/2/2c/Lineale.jpg/180px-Lineale.jpg)
![](https://upload.wikimedia.org/wikipedia/commons/thumb/6/6c/CarpentersRule.png/180px-CarpentersRule.png)
![](https://upload.wikimedia.org/wikipedia/commons/thumb/3/35/TapeMeasure.png/180px-TapeMeasure.png)
![](https://upload.wikimedia.org/wikipedia/commons/thumb/8/86/Steel_ruler_closeup.jpg/180px-Steel_ruler_closeup.jpg)
A ruler, sometimes called (by uneducated people) a rule or line gauge, is an instrument used in geometry, technical drawing, printing and engineering/building to measure distances and/or to rule straight lines. Strictly speaking, the ruler is essentially a straightedge used to rule lines[citation needed], but typically the ruler also contains calibrated lines to measure distances.[1]
Types
Rulers have long been made of wood in a wide range of sizes. However, they are not all wooden. Plastics have been used since they were invented; they can be molded with length markings instead of being scribed. Metal is used for more durable rulers for use in the workshop; sometimes a metal edge is embedded into a wooden desk ruler to preserve the edge when used for straight-line cutting. 12 inches or 30 cm in length is useful for a ruler to be kept on a desk to help in drawing. Shorter rulers are convenient for keeping in a pocket.[2] Longer rulers, e.g., 18 inches (45 cm) are necessary in some cases. Rigid wooden or plastic yardsticks, 1 yard long and meter sticks, 1 meter long, are also used. Classically, long measuring rods were used for larger projects, now superseded by tape measure or laser rangefinders.
Desk rulers are used for three main purposes: to measure, to aid in drawing straight lines and as a straight guide for cutting and scoring with a blade. Practical rulers have distance markings along their edges.
A type of ruler used in the printing industry is called a line gauge. These may be made from a variety of materials, typically metal or clear plastic. Units of measurement on a basic line gauge usually include inches, agate, picas, and points. More detailed line gauges may contain sample widths of lines, samples of common type in several point sizes, etc.
Measuring instruments similar in function to rulers are made portable by folding (carpenter's folding rule) or retracting into a coil (metal tape measure) when not in use. When extended for use they are straight, like a ruler. The illustrations on this page show a 2-meter carpenter's rule which folds down to a length of 24 cm to easily fit in a pocket, and a 5-meter-long tape which retracts into a small housing.
A flexible length measuring instrument which is not necessarily straight in use is the tailor's fabric tape measure, a length of tape calibrated in inches and centimeters. It is used to measure around a solid body, e.g., a person's waist measurement, as well as linear measurement, e.g., inside leg. It is rolled up when not in use, taking up little space.
A contraction rule is made having larger divisions than standard measures to allow for shrinkage of a metal casting. They may also be known as a 'shrinkage or shrink rule.[3]
A ruler software program can be used to measure pixels on a computer screen.
Ruler applications in geometry
In geometry, a ruler without any marks on it (a straightedge) may be used only for drawing straight lines between points, not measuring. A straightedge is also used to help draw accurate graphs in algebra and other math subjects.
A ruler and compass construction refers to constructions using an unmarked ruler and a compass. It is possible to bisect an angle into two equal parts with ruler and compass. It can be proved, though, that it is impossible to divide an angle into three equal parts using only a compass and straightedge — the problem of angle trisection. However, should two marks be allowed on the ruler, the problem becomes solvable.
History
![](https://upload.wikimedia.org/wikipedia/commons/thumb/d/db/MaryRose-carpentry_tools1.jpg/220px-MaryRose-carpentry_tools1.jpg)
Rulers made of Ivory were in use by the Indus Valley Civilization period prior to 1500 BC.[4] Excavations at Lothal (2400 BC) have yielded one such ruler calibrated to about 1⁄16 in (1.6 mm).[4] Ian Whitelaw holds that the Mohenjo-Daro ruler is divided into units corresponding to 1.32 in (33.5 mm) and these are marked out in decimal subdivisions with amazing accuracy, to within 0.005 in (0.13 mm). Ancient bricks found throughout the region have dimensions that correspond to these units.[5]
Anton Ullrich invented the folding ruler in 1851.
Philosophy
Ludwig Wittgenstein famously used rulers as an example in his discussion of language games in the Philosophical Investigations. He pointed out that the standard meter bar in Paris was the criterion against which all other rulers were determined to be one meter long, but that there was no analytical way to demonstrate that the standard meter bar itself was one meter long. It could only be asserted as one meter as part of a language game.
See also
- Dividing engine
- Geometry template
- Golomb ruler
- Measuring rod
- Rolling ruler
- Scale rulers: architect's scale and engineer's scale
References
Notes
- ^ Dictionary.com definition
- ^ "Steel Rule Has Pocket Clip For Use As A Depth Gauge" Popular Science, December 1935 pg.887 bottom right
- ^ http://www.answers.com/topic/contraction-rule
- ^ a b Whitelaw, p. 14.
- ^ Whitelaw, p. 15.
Bibliography
- Whitelaw, Ian (2007). A Measure of All Things: The Story of Man and Measurement. Macmillan. ISBN 0-312-37026-1.