A day is traditionally defined as the span of time it takes for the Earth or a celestial body (such as an other planet or a moon) to make a single rotation with respect to a star, measured most accurately from local noon to local noon. With a view to a far star assumed as fixed, this stellar day could be equivalent to one entire rotation of the body upon itself; in view of the Sun being the central star, this solar day does not equal a whole rotation period around the body's axis (obversely, the motion of revolving around the Sun would perform one day within an orbital period by its own without any spinning). Because celestial orbits are not perfectly circular, and thus objects travel at different speeds at various positions in their orbit, a solar day is not of the same length of time throughout the orbital period, in the course of a year. An additional disparity derives from the fact that the rotation periods, for instance of Earth's spin, are not exactly the same, mainly as a result of tidal effects.
The average length of a solar day on Earth is about 86,400 seconds (24 hours), and, until 1967, other smaller units of time (hour, minute, and second) were defined as specific fractions of the solar year for 1900. In 1967, the second was redefined in terms of the wavelength of light, and it became the SI base unit of time. The measurement unit of time called "day", defined as 86,400 SI seconds and symbolized d is not an SI unit, but it is accepted for use with SI.[1] It equates to the civil day, plus or minus a possible leap second in Coordinated Universal Time UTC.
However, the solar day on Earth is a natural phenomenon a lot of species refer to, when they constitute patterns of proceeding and the like circadian rhythms.
The word day can also refer to the (roughly) half of the day that is not night, also known as 'daytime'. Within these meanings, several definitions can be distinguished. 'Day' may also refer to a day of the week or to a calendar date, as in answer to the question "On which day?".
Contents |
Introduction
![](https://web.archive.org/web/20110506122435im_/http://upload.wikimedia.org/wikipedia/commons/thumb/7/7d/Dagr_by_Arbo.jpg/220px-Dagr_by_Arbo.jpg)
Besides the day of 24 hours (86,400 seconds), the word day is used for several different spans of time based on the rotation of the Earth around its axis. An important one is the solar day, defined as the time it takes for the sun to return to the zenith (its highest point in the sky). Because the Earth orbits the Sun elliptically as the Earth spins on an inclined axis, this period can be up to 7.9 seconds more than (or less than) 24 hours. On average over the year this day is equivalent to 24 hours (86,400 seconds).
A day, in the sense of daytime that is distinguished from night-time, is commonly defined as the period during which sunlight directly reaches the ground, assuming that there are no local obstacles. The length of daytime averages slightly more than half of the 24-hour day. Two effects make daytime on average longer than nights. The Sun is not a point, but has an apparent size of about 32 minutes of arc. Additionally, the atmosphere refracts sunlight in such a way that some of it reaches the ground even when the Sun is below the horizon by about 34 minutes of arc. So the first light reaches the ground when the centre of the Sun is still below the horizon by about 50 minutes of arc. The difference in time depends on the angle at which the Sun rises and sets (itself a function of latitude), but can amount to around seven minutes.
Ancient custom has a new day start at either the rising or setting of the Sun on the local horizon (Italian reckoning, for example) The exact moment of, and the interval between, two sunrises or two sunsets depends on the geographical position (longitude as well as latitude), and the time of year. This is the time as indicated by ancient hemispherical sundials.
A more constant day can be defined by the Sun passing through the local meridian, which happens at local noon (upper culmination) or midnight (lower culmination). The exact moment is dependent on the geographical longitude, and to a lesser extent on the time of the year. The length of such a day is nearly constant (24 hours ± 30 seconds). This is the time as indicated by modern sundials.
A further improvement defines a fictitious mean Sun that moves with constant speed along the celestial equator; the speed is the same as the average speed of the real Sun, but this removes the variation over a year as the Earth moves along its orbit around the Sun (due to both its velocity and its axial tilt).
The Earth's day has increased in length over time. This phenomenon is due to tides raised by the Moon which slow Earth's rotation. Because of the way the second is defined, the mean length of a day is now about 86,400.002 seconds, and is increasing by about 1.7 milliseconds per century (an average over the last 2,700 years). See tidal acceleration for details. The length of one day was about 21.9 hours 620 million years ago as recorded by rhythmites (alternating layers in sandstone); when the Earth was new about 4.5 billion years ago, it was probably around six hours as determined by computer simulations. The length of day for the Earth or Proto-Earth before the event which created our moon by an impact is yet unknown.
Etymology
The term comes from the Old English dæg, with its cognates such as Tag in German, and dag in Norwegian, Danish, Swedish and Dutch.
International System of Units (SI)
A day is defined as 86,400 seconds.
A day on the UTC time scale can include a negative or positive leap second, and can therefore have a length of 86,399 or 86,401 seconds.
The International Bureau of Weights and Measures (BIPM) currently defines a second as
… the duration of 9 192 631 770 periods of the radiation corresponding to the transition between two hyperfine levels of the ground state of the caesium 133 atom.[2]
This makes the SI-based day last exactly 794,243,384,928,000 of those periods.
Decimal and metric time
In the 19th century it had also been suggested to make a decimal fraction (1⁄10,000 or 1⁄100,000) of an astronomic day the base unit of time. This was an afterglow of decimal time and calendar, which had been given up already for its difficulty to comply with familiar units. The still most successful candidate is the centiday = 14.4 minutes, as a shorter quarter of an hour and also close to the SI target kilosecond and old Chinese ke.
Astronomy
A day of exactly 86,400 SI seconds is the astronomical unit of time (the second is not preferred in astronomy).[3]
For a given planet, there are three types of day defined in astronomy:
- stellar day - an entire rotation of a planet with respect to the distant stars
- sidereal day - a single rotation of a planet with respect to the vernal equinox
- mean solar day - average time of a single rotation of a planet with respect to the sun as the central star
For Earth, the stellar day and the sidereal day are nearly of the same length and about 3 minutes 56 seconds shorter than the solar day. In fact, the Earth spins 366 times about its axis during a 365-day year, because the Earth's revolution about the Sun removes one apparent turn of the Sun about the Earth.
Colloquial
The word refers to various relatedly defined ideas, including the following:
- 24 hours (exactly)
- the period of light when the Sun is above the local horizon (that is, the time period from sunrise to sunset);
- the full day covering a dark and a light period, beginning from the beginning of the dark period or from a point near the middle of the dark period;
- a full dark and light period, sometimes called a nychthemeron in English, from the Greek for night-day;
- the time period from 6:00 AM to 6:00 PM or 9:00 PM or some other fixed clock period overlapping or set off from other time periods such as "morning", "evening", or "night".
Civil day
For civil purposes a common clock time has been defined for an entire region based on the mean local solar time at some central meridian. Such time zones began to be adopted about the middle of the 19th century when railroads with regular schedules came into use, with most major countries having adopted them by 1929. For the whole world, 40 such time zones are now in use. The main one is "world time" or Coordinated Universal Time (UTC).
The present common convention has the civil day starting at midnight, which is near the time of the lower culmination of the mean Sun on the central meridian of the time zone. A day is commonly divided into 24 hours of 60 minutes of 60 seconds each.
Leap seconds
To keep the civil day aligned with the apparent movement of the Sun, positive or negative leap seconds may be inserted.
A civil clock day is typically 86,400 SI seconds long, but will be 86,401 s or 86,399 s long in the event of a leap second.
Leap seconds are announced in advance by the International Earth Rotation and Reference Systems Service which measures the Earth's rotation and determines whether a leap second is necessary. Leap seconds occur only at the end of a UTC month, and have only ever been inserted at the end of June 30 or December 31.
Boundaries of the day
For most diurnal animals, the day naturally begins at dawn and ends at sunset. Humans, with our cultural norms and scientific knowledge, have supplanted Nature with several different conceptions of the day's boundaries. The Jewish day begins at either sunset or at nightfall (when three second-magnitude stars appear). Medieval Europe followed this tradition, known as Florentine reckoning: in this system, a reference like "two hours into the day" meant two hours after sunset and thus times during the evening need to be shifted back one calendar day in modern reckoning. Days such as Christmas Eve, Halloween, and the Eve of Saint Agnes are the remnants of the older pattern when holidays began the evening before. Present common convention is for the civil day to begin at midnight, that is 00:00 (inclusive), and last a full 24 hours until 24:00 (exclusive).
In ancient Egypt, the day was reckoned from sunrise to sunrise. Muslims fast from daybreak to sunset each day of the month of Ramadan. The "Damascus Document", copies of which were also found among the Dead Sea scrolls, states regarding Sabbath observance that "No one is to do any work on Friday from the moment that the sun's disk stands distant from the horizon by the length of its own diameter," presumably indicating that the monastic community responsible for producing this work counted the day as ending shortly before the sun had begun to set.
In the United States, nights are named after the previous day, e.g. "Friday night" usually means the entire night between Friday and Saturday. This is the opposite of the Jewish pattern. This difference from the civil day often leads to confusion. Events starting at midnight are often announced as occurring the day before. TV-guides tend to list nightly programs at the previous day, although programming a VCR requires the strict logic of starting the new day at 00:00 (to further confuse the issue, VCRs set to the 12-hour clock notation will label this "12:00 AM"). Expressions like "today", "yesterday" and "tomorrow" become ambiguous during the night.
Validity of tickets, passes, etc., for a day or a number of days may end at midnight, or closing time, when that is earlier. However, if a service (e.g. public transport) operates from for example, 6:00 to 1:00 the next day (which may be noted as 25:00), the last hour may well count as being part of the previous day (also for the arrangement of the timetable). For services depending on the day ("closed on Sundays", "does not run on Fridays", and so on) there is a risk of ambiguity. As an example, for the Nederlandse Spoorwegen (Dutch Railways), a day ticket is valid 28 hours, from 0:00 to 28:00 (that is, 4:00 the next day). To give another example, the validity of a pass on London Regional Transport services is until the end of the "transport day" -- that is to say, until 4:30 am on the day after the "expiry" date stamped on the pass.
24 hours vs daytime
To distinguish between a full day and daytime, the word nychthemeron may be used in English for the former, or more colloquially the term 24 hours. In other languages, the latter is also often used. Other languages also have a separate word for a full day, such as יממה in Hebrew, dygn in Swedish, etmaal in Dutch, doba in Polish, сутки (sutki) in Russian, суткі (sutki) in Belarusian and доба́ (doba) in Ukrainian. In Spanish, singladura is used, but only as a marine unit of length, being the distance covered in 24 hours.[4]
See also
- 104 s, times from 10 kiloseconds to 100 kiloseconds
- Calculating the day of the week
- Daylight
- Daylight saving time
- Meteorological day
- Season, for a discussion of daylight and darkness at various latitudes
- Synodic day
Notes and references
- ^ "Non-SI units accepted for use with the SI, and units based on fundamental constants". http://www.bipm.org/en/si/si_brochure/chapter4/table6.html.
- ^ Resolution 1 of the 13th meeting of the CGPM (1967/68)
- ^ P. Kenneth Seidelmann, ed., Explanatory Supplement to the Astronomical Almanac, (Mill Valley, CA: Uni versity Science Books, 1992) 696.
- ^ "singladura - Definición". WordReference.com. http://www.wordreference.com/definicion/singladura. Retrieved 2009-03-22.
External links
- Definitions of day, night, twilight (USA navy site)
- Formulas to calculate the length of day and night
- Sunrise and sunset, all year long, anywhere
- Show where it is daytime at the moment
|
|
|