ISO 9564 is an international standard for personal identification number (PIN) management and security in retail banking.
The PIN is used to verify the identity of a customer (the user of a bank card) within an electronic funds transfer system, and (typically) to authorise the transfer of funds, so it is important to protect it against unauthorised disclosure or misuse. Modern banking systems require interoperability between different card issuers, acquiring banks and retailers – including transmission of PINs between those entities – so a common set of rules for handling and securing PINs is required, both to ensure technical compatibility and a mutually agreed level of security. ISO 9564 provides principles and techniques to meet these requirements.
ISO 9564 comprises four parts, under the general title of Financial services — Personal Identification Number (PIN) management and security.[Note 1]
Contents |
Part 1: Basic principles and requirements for online PIN handling in ATM and POS systems
ISO 9564-1:2002[1] specifies the basic principles and techniques of secure PIN management. It includes both general principles and specific requirements.
(ISO 9564-1:2002 has been been superseded by ISO 9564-1:2011 Basic principles and requirements for PINs in card-based systems.[2])
Basic principles
The basic principles of PIN management include:
- PIN management functions shall be implemented in software and hardware in such a way that the functionality cannot be modified without detection, and that the data cannot be obtained or misused.
- The PIN must always be stored encrypted or physically secured.
- Encrypting the same PIN with the same key but for a different bank account shall not predictably give the same cipher text.
- Security of the PIN encryption shall depend on secrecy of the key, not secrecy of the algorithm.
- Only the customer (i.e. the user of a card) and/or authorised card issuer staff shall be involved with PIN selection or issuing. Where card issuer staff are involved, appropriate strictly enforced procedures shall be used.
- A stored encrypted PIN shall be protected from substitution.
- A PIN shall be revoked if it is compromised, or suspected to be.
- The card issuer shall be responsible for PIN verification, but may delegate that responsibility to another institution.
- The customer shall be advised of the importance of keeping the PIN secret.
PIN entry devices
The standard specifies some characteristics required (or recommended) of PIN entry devices (also known as PIN pads), i.e. the device into which the customer enters the PIN, including:
- All PIN entry devices shall allow entry of the digits zero to nine. Numeric keys may also have letters printed on them, e.g. as per E.161. These letters are only for the customers' convenience; internally, the PIN entry device only handles digits. (E.g. the standard does not support multi-tap or similar.) The standard also recommends that customers should be warned that not all devices may have letters.
- The PIN shall not be displayed or disclosed by audible feedback.
- The PIN entry device shall be physically secured so that it is not feasible to modify its operation or extract PINs or encryption keys from it.
- The PIN entry device shall be designed or installed so as to prevent other people from observing the PIN as it is entered.
- The keyboard layout should be standardized, with consistent and unambiguous labels for function keys, such as "enter", "clear" (this entry) and "cancel" (the transaction). The standard also recommends specific colours for function keys: green for "enter", yellow for "clear", red for "cancel".
Other specific PIN control requirements
Other specific requirements include:
- All hardware and software used for PIN management functions shall be implemented such that:
- Their correct functioning can be assured.
- They cannot be modified or accessed without detection.
- The data cannot be inappropriately accessed, modified or misused.
- The PIN cannot be determined by a brute-force search.
- The PIN shall not be communicated verbally. In particular bank personnel shall never ask the customer to disclose the PIN, nor recommend a PIN value.
- PIN encryption keys shall not be used for any other purpose.
PIN length
The standard specifies that PINs shall be from four to twelve digits long, noting that longer PINs are more secure but harder to use. It also notes that not all systems support entry of PINs longer than six digits.
PIN selection
There are three methods of selecting or generating a PIN:
- assigned derived PIN
- The card issuer generates the PIN by applying some cryptographic function to the account number or other value associated with the customer. In this case the issuer need not - and should not - keep a record of the PIN, because it can derived again when it needs to be verified.
- assigned random PIN
- The card issuer generates a PIN value using a random number generator.
- customer-selected PIN
- The customer selects the PIN value.
PIN issuance and delivery
The standard includes requirements for keeping the PIN secret while transmitting it, after generation, from the issuer to the customer. These include:
- The PIN shall be only be mailed in a PIN mailer, an envelope designed so that it can be printed without the PIN being visible (even at printing time) until the envelope is opened. A PIN mailer must also be constructed so that any prior opening will be obvious to the customer, who will then be aware that the PIN may have been disclosed.
- The PIN shall never appear where it can be associated with a customer's account. For example the PIN mailer must not include the account number, but only sufficient information for its physical delivery (e.g. name and address). The PIN and the associated card shall not be mailed together, nor at the same time.
PIN encryption
To protect the PIN during transmission from the PIN entry device to the verifier, the standard requires that the PIN be encrypted, and specifies several formats that may be used. In each case, the PIN is encoded into a 64-bit PIN block, which is then encrypted by an "approved algorithm" (currently TDEA, according to part 2 of the standard).
The PIN block formats are:
Format 0
The PIN block is constructed by XORing two 64-bit fields: the plain text PIN field and the account number field, both of which comprise 16 four-bit nibbles.
The plain text PIN field is:
- one nibble with the value of 0, which identifies this as a format 0 block
- one nibble encoding the length N of the PIN
- N nibbles, each encoding one PIN digit
- 14−N nibbles, each holding the "fill" value 15
The account number field is:
- four nibbles with the value of zero
- 12 nibbles containing the right-most 12 digits of the primary account number (PAN), excluding the check digit
Format 1
This format should be used where no PAN is available. The PIN block is constructed by concatenating the PIN with a transaction number thus:
- 1 nibble with the value of 1, which identifies this as a format 1 block
- 1 nibble encoding the length N of the PIN
- N nibbles, each encoding one PIN digit
- 14−N nibbles encoding a unique value, which may be a transaction sequence number, time stamp or random number
Format 2
Format 2 is for local use with off-line systems only (e.g. smart cards). It is specified in part 3 of the standard.
Format 3
Format 3 is the same as format 0, except that "fill" digits are random, and the first nibble (which identifies the block format) has the value 3.
Part 2: Approved algorithms for PIN encipherment
ISO 9564-2[3] specifies which encryption algorithms may be used for encrypting PINs.
As of September 2010 the only allowable algorithms are TDEA and RSA. Encryption with RSA is approved for use with ISO 9564-3 (offline PIN handling) only.
Part 3: Requirements for offline PIN handling in ATM and POS systems
ISO 9564-3[4] specifies the requirements for handling and verifying PINs that are verified by a smart card itself, rather than being sent to the bank for verification.
PIN protection between entry device and smart card
The PIN entry device and the smart card reader that will verify the PIN may be integrated into a single physically secure unit, but they do not need to be. If they are not both part of an integrated secure unit, then the PIN shall be encrypted while it is transmitted from the PIN entry device to the card reader.
Independently of whether the PIN is encrypted from the entry device to the card reader, the PIN may be encrypted for transmission from the card reader to the card.
Physical security
Generally, the PIN entry device used for offline PIN handling should meet the same requirements as for online PIN handling, described in part 1. Additionally, the card reader should be constructed to prevent someone monitoring the communications to the card by inserting a monitoring device into the card slot.
PIN blocks
If the PIN is encrypted for transmission from the entry device to the card reader, it shall be encrypted using one of the PIN block formats specified in part 1 (i.e. format 0, 1 or 3).
The card reader shall always submit the PIN to the card encoded as a format 2 PIN block, whether or not it is encrypted. If it is encrypted, a unique key shall be used for each transaction.
Format 2 PIN block
The format 2 PIN block is constructed thus:
- 1 nibble with the value of 2, which identifies this as a format 2 block
- 1 nibble encoding the length N of the PIN
- N nibbles, each encoding one PIN digit
- 14-N nibbles, each holding the "fill" value 15
Part 4: Guidelines for PIN handling in open networks
ISO 9564-4[5] provides guidelines for PIN handling in open networks, i.e. in environments where issuers and acquirers have no direct control, or where no relationship exists between the PIN entry device and the acquirer prior to the transaction.
Notes
- ^ The exact wording of this title varies between parts. This is the wording of the most recently published part.
References
- ^ ISO 9564-1:2002 Banking — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for online PIN handling in ATM and POS systems
- ^ ISO 9564-1:2011 Financial services — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based systems
- ^ ISO 9564-2:2005 Banking — Personal Identification Number management and security — Part 2: Approved algorithms for PIN encipherment
- ^ ISO 9564-3:2003 Banking — Personal Identification Number management and security — Part 3: Requirements for offline PIN handling in ATM and POS systems
- ^ ISO/TR 9564-4:2004 Banking — Personal Identification Number (PIN) management and security — Part 4: Guidelines for PIN handling in open networks