ANSI C, ISO C and Standard C refer to the successive standards for the C programming language published by the American National Standards Institute (ANSI) and the International Organization for Standardization (ISO). Historically, the names referred specifically to the original and best-supported version of the standard (known as C89 or C90). Software developers writing in C are encouraged to conform to the standards, as doing so aids portability between compilers.
Contents
History and outlook
The first standard for C was published by ANSI. Although this document was subsequently adopted by International Organization for Standardization (ISO) and subsequent revisions published by ISO have been adopted by ANSI, the name ANSI C (rather than ISO C) is still more widely used. While some software developers use the term ISO C, others are standards body–neutral and use Standard C.
C89
In 1983, the American National Standards Institute formed a committee, X3J11, to establish a standard specification of C. The standard was completed in 1989 and ratified as ANSI X3.159-1989 "Programming Language C." This version of the language is often referred to as "ANSI C". Later on sometimes the label "C89" is used to distinguish it from C99 but using the same labelling method.
C90
The same standard as C89 was ratified by the International Organization for Standardization as ISO/IEC 9899:1990, with only formatting changes,[1] which is sometimes referred to as C90. Therefore, the terms "C89" and "C90" refer to essentially the same language.
This standard has been withdrawn by both ANSI/INCITS[2] and ISO/IEC.[3]
C95
In 1995 the ISO published an extension, called Amendment 1, for the ANSI-C standard. Its full name finally was ISO/IEC 9899/AMD1:1995 or nicknamed C95. Aside to error correction there were further changes to the language capabilities,[4][5] such as:
- Improved multi byte and wide character support in the standard library, introducing
<wchar.h>
and<wctype.h>
as well as multibyte I/O. - Addition of Digraphs to the language.
- Specification of standard macros for the alternative specification of operators, e.g.
and
for&&
. - Specification of the standard macro
__STDC_VERSION__
.
In addition to the amendment, two technical corrigenda were published by ISO for C90:
- ISO/IEC 9899 TCOR1 in 1995
- ISO/IEC 9899 TCOR2 in 1996.
Preprocessor Test for C95 compatibility
#if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199409Ljd
/* C95 compatible source code. */
#elif defined(__ANSI__)
/* C89 compatible source code. */
#endif
C99
In March 2000, ANSI adopted the ISO/IEC 9899:1999 standard. This standard is commonly referred to as C99. Some notable additions to the previous standard include:
- New built-in data types:
long long
,_Bool
,_Complex
, and_Imaginary
- Several new core language features, including static array indices, designated initializers, compound literals, variable-length arrays, flexible array members, variadic macros, and
restrict
keyword - Several new library headers, including
stdint.h
,<tgmath.h>
,fenv.h
,<complex.h>
- Improved compatibility with several C++ features, including inline functions, single-line comments, mixing declarations and code, universal character names in identifiers
- removed several dangerous C89 language features such as implicit function declarations and implicit int
Three technical corrigenda were published by ISO for C99:
- ISO/IEC 9899:1999/Cor.1:2001(E)
- ISO/IEC 9899:1999/Cor.2:2004(E)
- ISO/IEC 9899:1999/Cor.3:2007(E), notable for deprecating the standard library function gets
This standard has been withdrawn by both ANSI/INCITS[6] and ISO/IEC[7] in favour of C11.
C11
"C11" is the current standard for the C programming language. Notable features introduced over the previous revision include improved Unicode support, type-generic expressions using the new _Generic
keyword, a cross-platform multi-threading API (threads.h
) and atomic types support in both core language and the library (stdatomic.h
).
One technical corrigendum has been published by ISO for C11:
- ISO/IEC 9899:2011/Cor 1:2012[8]
Other ISO publications
As part of the standardization process, ISO also publishes technical reports and specifications:
- ISO/IEC TR 19769:2004,[9] on library extensions to support Unicode transformation formats, integrated into C11
- ISO/IEC TR 24731-1:2007,[10] on library extensions to support bounds-checked interfaces, integrated into C11
- ISO/IEC TR 18037:2008,[11] on embedded C extensions
- ISO/IEC TR 24732:2009,[12] on decimal floating point arithmetic, superseded by ISO/IEC TS 18661-2:2015
- ISO/IEC TR 24747:2009,[13] on special mathematical functions,
- ISO/IEC TR 24731-2:2010,[14] on library extensions to support dynamic allocation functions
- ISO/IEC TS 17961:2013,[15] on secure coding in C
- ISO/IEC TS 18661-1:2014,[16] on IEC 60559:2011-compatible binary floating-point arithmetic
- ISO/IEC TS 18661-2:2015,[17] on IEC 60559:2011-compatible decimal floating point arithmetic
- ISO/IEC TS 18661-3:2015,[18] on IEC 60559:2011-compatible interchange and extended floating-point types
- ISO/IEC TS 18661-4:2015,[19] on IEC 60559:2011-compatible supplementary functions
More technical specifications are in development and pending approval, including the fifth and final part of TS 18661, a software transactional memory specification, and parallel library extensions.[20]
Support from major compilers
ANSI C is now supported by almost all the widely used compilers. Most of the C code being written nowadays is based on ANSI C. Any program written only in standard C and without any hardware dependent assumptions is virtually guaranteed to compile correctly on any platform with a conforming C implementation. Without such precautions, most programs may compile only on a certain platform or with a particular compiler, due, for example, to the use of non-standard libraries, such as GUI libraries, or to the reliance on compiler- or platform-specific attributes such as the exact size of certain data types and byte endianness.
Compliance detectability
To mitigate the differences between K&R C and the ANSI C standard, the __STDC__
("standard c") macro can be used to split code into ANSI and K&R sections.
#if defined(__STDC__) && __STDC__
extern int getopt(int, char * const *, const char *);
#else
extern int getopt();
#endif
In the above example, a prototype is used in a function declaration for ANSI compliant implementations, while an obsolescent non-prototype declaration is used otherwise. Those are still ANSI-compliant as of C99. Note how this code checks both definition and evaluation: this is because some implementations may set __STDC__
to zero to indicate non-ANSI compliance.[citation needed]
Compilers supporting ANSI C
- Amsterdam Compiler Kit (C K&R and C89/90)
- ARM RealView
- Clang, using LLVM backend
- GCC (Full C89/90, C99 and C11)
- HP C/ANSI C compiler (C89 and C99)[21]
- IBM XL C/C++ (C11, starting with version 12.1)[22]
- Intel's ICC
- LabWindows/CVI
- LCC
- OpenWatcom (C89/90 and some C99)
- Microsoft Visual C++ (C89/90 and some C99)
- Pelles C (C99 and C11. Windows only.)
- vbcc (C89/90 and C99)
References
- ^ "Standards - Using the GNU Compiler Collection (GCC)". Retrieved 2012-06-24.
- ^ http://www.techstreet.com/cgi-bin/detail?doc_no=incits_iso_iec%7C9899;product_id=232462
- ^ "ISO/IEC 9899:1990 - Programming Languages -- C". Retrieved 2012-06-24.
- ^ Clive D.W. Feather (2010-09-12). "A brief description of Normative Addendum 1".
- ^ "ISO/IEC 9899:1990/Amd 1:1995". International Organization for Standardization. 2013-03-22.
- ^ "INCITS/ISO/IEC 9899-2012". ANSI.
- ^ "ISO/IEC 9899:1999 - Programming Languages -- C". Retrieved 2012-06-24.
- ^ "ISO/IEC 9899:2011/Cor 1:2012". International Organization for Standardization.
- ^ "ISO/IEC TR 19769:2004". International Organization for Standardization.
- ^ "ISO/IEC TR 24731-1:2007". International Organization for Standardization.
- ^ "ISO/IEC TR 18037:2008". International Organization for Standardization.
- ^ "ISO/IEC TR 24732:2009". International Organization for Standardization.
- ^ "ISO/IEC TR 24747:2009". International Organization for Standardization.
- ^ "ISO/IEC TR 24731-2:2010". International Organization for Standardization.
- ^ "ISO/IEC TS 17961:2013". International Organization for Standardization.
- ^ "ISO/IEC TS 18661-1:2014". International Organization for Standardization.
- ^ "ISO/IEC TS 18661-2:2015". International Organization for Standardization.
- ^ "ISO/IEC TS 18661-3:2015". International Organization for Standardization.
- ^ "ISO/IEC TS 18661-4:2015". International Organization for Standardization.
- ^ See a list at http://en.cppreference.com/w/c/experimental Visited 16 January 2016.
- ^ "HP C/ANSI C developer's bundle". Retrieved 2015-07-12.
- ^ Support for ISO C11 added to IBM XL C/C++ compilers
External links
- ISO C working group
- Draft ANSI C Standard (ANSI X3J11/88-090) (May 13, 1988), Third Public Review
- Draft ANSI C Rationale (ANSI X3J11/88-151) (Nov 18, 1988)
- C Information Bulletin #1 (ANSI X3J11/93-007) (May 27, 1992)
- ANSI C Yacc grammar
- Schreiner, Axel-Tobias. Object oriented programming with ANSI-C. Hanser. ISBN 3-446-17426-5. hdl:1850/8544.
- "ISO/IEC 9899:1999 Programming Languages -- C". American National Standards Institute.
- "ANSI Standards Action Vol. 36, #48" (PDF). American National Standards Institute. 2005-12-02.
|