![]() |
This article is part of a series on the politics and government of Australia |
|
Related topics
|
The Australian electoral system has evolved over 150 years of democratic government, including through the Australian Parliament, instituted in 1901. The present-day federal parliament has a number of distinctive features including compulsory voting, with full-preferential instant-runoff voting in single-member seats to elect the lower house, the House of Representatives, and the use of single-transferable proportional voting to elect the upper house, the Senate.[1]
Federal elections and referenda are conducted by the Australian Electoral Commission. State and local government elections are overseen by separate Electoral Commissions in each state and territory: New South Wales elections are conducted by the New South Wales Electoral Commission; in Queensland it is the Electoral Commission of Queensland; in Victoria it is the Victorian Electoral Commission; in South Australia it is the Electoral Commission of South Australia; in Tasmania it is the Tasmanian Electoral Commission; and in the Australian Capital Territory it is the Australian Capital Territory Electoral Commission.
Contents
Voting system
Enrolment of electors
A citizen can only vote if enrolled on an electoral roll. Enrolling to vote is mandatory for those over the age of 18. Failure to enroll can incur a fine.[2] However, citizens who later enroll themselves are protected from prosecution for not enrolling in the previous years by section 101(7) of the Commonwealth Electoral Act 1918.[3] Nevertheless, about 1.3 million people otherwise eligible to vote have failed to enroll prior to the 2013 federal election.[4]
In New South Wales, this situation has been somewhat modified by the NSW Electoral Commission's "Smart Roll" system. Introduced in 2009, the system draws information from various government departmental sources and enrolls eligible electors automatically on to the state roll, but not the federal roll.[5] A protection in Section 101 (8) exists for offences prior to enrolment (including failure to enroll) for those enrolled in such a way by the Electoral Commissioner.
Compulsory voting
Australia enforces compulsory voting,[6] which has been a requirement since 1924. Compulsory voting at referendums was considered when a referendum was proposed in 1915, but, as the referendum was never held, the idea was put on hold.[7]
The immediate justification for compulsory voting at the federal level was the low voter turnout (59.38%)[7] at the 1922 federal election, down from 71.59% at the 1919 federal election. Compulsory voting was not on the platform of either the Stanley Bruce-led Nationalist/Country party coalition government or the Matthew Charlton-led Labor opposition. The actual initiative for change was made by Herbert Payne, a backbench Tasmanian Nationalists senator who on 16 July 1924 introduced a private member's bill in the Senate. Payne's bill was passed with little debate (the House of Representatives agreeing to it in less than an hour), and in neither house was a division required, hence no votes were recorded against the bill.[8] It received Royal Assent on 31 July 1924 as the Commonwealth Electoral Act 1924.[9] The 1925 federal election was the first to be conducted under compulsory voting, which saw the turnout figure rise to 91.4%, up from 59.36% at the 1922 federal election. The turnover increased to about 95% within a couple of elections and has stayed at about that level since.
Voting is compulsory both at federal elections and at elections for the state and territory legislatures. In the states of South Australia, Tasmania and Western Australia voting at local elections is not compulsory.[10] About 5% of enrolled voters fail to vote at most elections. People in this situation are asked to explain their failure to vote. If no satisfactory reason is provided (for example, illness or religious prohibition), a fine of up to $170 is imposed,[11] and failure to pay the fine may result in a court hearing.
It is an offence to "mislead an elector in relation to the casting of his vote". An "informal vote" is one which has not been filled in correctly or not at all. The number of informal votes is counted but, in the determination of voter preferences, they are included in the total number of (valid) votes cast. Around 95% of registered voters attend polling, and around 5% of House of Representatives votes are informal.[12]
Objections to compulsory voting
Following the 2004 federal election, at which the Liberal-National coalition government won a majority in both houses, a senior minister, Senator Nick Minchin, said that he favoured the abolition of compulsory voting. Some prominent Liberals, such as Petro Georgiou, former chair of the Parliament's Joint Standing Committee on Electoral Matters, have spoken in favour of compulsory voting.[citation needed]
Peter Singer, in Democracy and Disobedience, argues that compulsory voting could negate the obligation of a voter to support the outcome of the election, since voluntary participation in elections is deemed to be one of the sources of the obligation to obey the law in a democracy.[citation needed] In 1996 Albert Langer was jailed for three weeks on contempt charges in relation to a constitutional challenge on a legal way not to vote for either of the major parties. Chong, Davidson and Fry, writing in the journal of the right wing think tank the CIS, argue that Australian compulsory voting is disreputable, paternalistic, disadvantages smaller political parties, and allows major parties to target marginal seats and make some savings in pork-barrelling because of this targeting. Chong et al. also argue that denial is a significant aspect of the debate about compulsory voting.[13]
A counter argument to opponents of compulsory voting is that in these systems the individual still has the practical ability to abstain at the polls by voting informally if they so choose, due to the secrecy of the ballot. A spoilt vote does not count towards any political party and effectively is the same as choosing not to vote under a non-compulsory voting system. However, Singer argues that even the appearance of voluntary participation is sufficient to create an obligation to obey the law.[citation needed]
In the 2010 Australian election, Mark Latham urged Australians to vote informally by handing in blank ballot papers for the 2010 election. He also stated that he doesn't feel it is fair for the government to force citizens to vote if they don't have an opinion or threaten them into voting with a fine.[14] An Australian Electoral Commission spokesman stated that the Commonwealth Electoral Act did not contain an explicit provision prohibiting the casting of a blank vote.[15] How the Australian Electoral Commission arrived at this opinion is unknown; it runs contrary to the opinions of Chief Justice Sir Garfield Barwick, who wrote that voters must actually mark the ballot paper and deposit that ballot into a ballot box, and Justice Blackburn who was of the opinion that casting an invalid vote was a violation of the Act.[13] Barwick CJ, the former Liberal politician, of course, was noted for his perverse judgements including reading into the Australian constitution a power that the government be able to fund all religious schools. He did this by claiming that the the word 'any' (ie in the constitutional prohibition against government funding 'any religion') actually meant the government must fund all religions equally.[16]
Tim Evans, a Director of Elections Systems and Policy of the AEC, wrote in 2006 that "It is not the case, as some people have claimed, that it is only compulsory to attend the polling place and have your name marked off and this has been upheld by a number of legal decisions."[17] Yet, practically, it remains the fact that having received a ballot paper, the elector can simply fold it up and put it into the ballot box without formally marking it, if he or she objects, in principle, to casting a vote. However, the consistently low number of informal votes each election indicates that having attended, had his or her name marked off, very few electors then choose not to vote formally.
Compulsory voting has also been promoted for its collective benefits. It becomes difficult for coercion to be used to prevent disadvantaged people (the old, illiterate or disabled) to vote, and for obstacles to be put in the way of classes of individuals (ethnic/coloured; either registration requirements or placement of voting booths) as often happens under other voting systems. The compulsion requirement also needs to be kept in proportion: jury duty and compulsory military service are vastly more onerous citizen's compulsions than attending a local voting booth once every few years. Perhaps the most compelling reason to use a system of compulsory voting is a simple matter of logistics, that is, in order to facilitate the smooth and orderly process of an election. Every year in countries that do not have compulsory voting election officials have to guess at the numbers of voters who might turn out - this often depends on the vagaries of the weather. Often voters are disenfranchied in those countries when voting officials err and not enough voting booths are provided. Long queues can result with voters being turned away at the close of polling not having had their chance to exercise their democratic right to vote.
Preferential voting
Australia uses various forms of preferential voting for almost all elections. Under this system, voters number the candidates on the ballot paper in the order of their preference. The preferential system was introduced in 1918, in response to the rise of the Country Party, a party representing small farmers. The Country Party split the anti-Labor vote in conservative country areas, allowing Labor candidates to win on a minority vote. The conservative government of Billy Hughes introduced preferential voting as a means of allowing competition between the two conservative parties without putting seats at risk. It was first used at the Corangamite by-election on 14 December 1918.[18][19] The system was first used for election for the Queensland Parliament in 1892. It was introduced in the Tasmanian House of Assembly in 1906 as a result of the work of Thomas Hare and Andrew Inglis Clark.
Preferential voting has gradually extended to both upper and lower houses, in the federal, state and territory legislatures, and is also used in municipal elections, and most other kinds of elections as well, such as internal political party elections, trade union elections, church elections, elections to company boards and elections in voluntary bodies such as football clubs. Negotiations for disposition of preference recommendations to voters are taken very seriously by candidates because transferred preferences carry the same weight as primary votes. Political parties usually produce how-to-vote cards to assist and guide voters in the ranking of candidates.
At some polling places in the Australian Capital Territory, voters may choose between voting electronically or on paper.[20] Otherwise, Australian elections are carried out using paper ballots. If more than one election takes place, for example for the House of Representatives and the Senate, then each election is on a separate ballot paper, which are of different colours and which are deposited into separate ballot boxes.
Allocation process for House of Representatives
The main elements of the operation of preferential voting for single-member House of Representatives divisions are as follows:[21][22]
- Voters are required to place the number "1" against their first choice of candidate, known as the "first preference" or "primary vote".
- Voters are then required to place the numbers "2", "3", etc., against all of the other candidates listed on the ballot paper, in order of preference.
- Prior to counting, each ballot paper is examined to ensure that it is validly filled in (and not invalidated on other grounds).
- The number "1" or first preference votes are counted first. If no candidate secures an absolute majority (more than half) of first preference votes, then the candidate with the fewest votes is excluded from the count.
- The votes for the eliminated candidate are re-allocated to the remaining candidates according to the number "2" or "second preference" votes.
- If no candidate has yet secured an absolute majority of the vote, then the next candidate with the fewest primary votes is eliminated. This preference allocation is repeated until there is a candidate with an absolute majority. Where a second (or subsequent) preference is expressed for a candidate who has already been eliminated, the voter's third or subsequent preferences are used.
Following the full allocation of preferences, it is possible to derive a two-party-preferred figure, where the votes have been allocated between the two main candidates in the election. In Australia, this is usually between the candidates from the Coalition parties and the Australian Labor Party.
Alternative allocation methods for Senate
For the Australian Senate, each State constitutes one multi-member electorate. Currently, 12 senators are elected from each State, one half every three years, except in the case of double dissolution when elections for all 12 senators in each State takes place. The number of senators to be elected determines the 'quota' required to be achieved for election. For a half-Senate election of 6 places to be filled, the quota in each State is 14.28% (calculated using the formula 1/(6+1)), while after a double dissolution the quota is 7.69% (calculated using the formula 1/(12+1)).
The federal Senate electoral system from 1984 to 2013, and those currently used for some state legislatures, provide for simultaneous registration of party-listed candidates and party-determined orders of voting preference, known as 'group voting tickets' or 'above the line voting' which involves placing the number '1' in a single box and the vote is then allocated in accordance with the party's registered voting preferences. The AEC automatically allocates preferences, or votes, in the predetermined order outlined in the group voting ticket. Each party or group can register up to three group voting tickets. This highly complex system has potential for unexpected outcomes,[23] including the possible election of a candidate who may have initially received an insignificant primary vote tally (see, for example, the Minor Party Alliance at the 2013 federal election). An estimated 95% of all votes are cast 'above the line'.[24]
The alternative, federally, was to use 'below the line voting' by numbering a large number of individual candidate's boxes in the order of their own preference. To be valid, the voter placed sequential numbers against every candidate on the ballot paper, and the risk of error and invalidation of the vote was significant.
Gerrymandering and malapportionment
Elections to the Senate are conducted on a State-basis, with each State constituting one multi-member electorate. Divisions for the House of Representatives elect one member per division.
Australian history has seen very little gerrymandering of electoral boundaries, relevant only for the House of Representatives and State Legislative Assemblies, which have nearly always been drawn up by public servants or independent boundary commissioners. But Australia has seen systematic malapportionment of electorates (the allocation of more or fewer electoral districts to one part of a country or state than its population would merit).
All the colonial legislatures before Federation, and the federal parliament after it, allocated more representation to rural districts than their populations merited. This was justified on several grounds: that country people had to contend with greater distances and hardships, that country people (and specifically farmers) produced most of the nation's real wealth, and that greater country representation was necessary to balance the radical tendencies of the urban population.
However, in the later 20th century, these arguments were successfully challenged, and by the early 21st century malapportionment was abolished in all states. In all states, electoral districts must have roughly the same number of voters, with variations allowed for rural areas due to their sparse population. Proponents of this concept call this "one vote one value."
Examples
The most conspicuous examples of malapportionment were those of South Australia, Queensland and Western Australia.
- South Australia
In South Australia, the 1856 Constitution stipulated that there must be two rural constituencies for every urban constituency. By the early 1960s, the urban-rural voter ratio was almost exactly reversed. More than two-thirds of the state's population lived in Adelaide and its suburbs, but the rural areas elected two-thirds of the legislature. This was despite the fact that by this time, rural seats had on average one-quarter as many voters as urban seats. In one of the more extreme cases, a vote in the rural seat of Frome was worth 10 times a vote in an Adelaide seat. The setup allowed the Liberal and Country League to stay in office from 1932 to 1965--the last 27 of those years under Thomas Playford. However, from 1947 onward, the LCL lost by increasing margins in terms of actual votes. It was possible for Labor to win by a margin large enough for a comprehensive victory in most other states and still be locked out of power. Largely because Playford was the main beneficiary, the setup was called "the Playmander," although it was not strictly speaking a gerrymander.
This gross distortion came into sharp focus during three consecutive state elections in the 1960s. In 1962, Labor routed the LCL in the two-party vote, but came up one seat short of a majority. However, it only managed a two-seat swing, one short of victory. Playford was able to continue in power with the support of two independents. The Playmander was not overcome until Labor defeated the LCL in 1965. Even then, rural weighting was strong enough that Labor won just barely enough seats for a majority, despite winning resoundingly in the two-party vote.
The LCL regained power in 1968, in another case that demonstrated the gross inequities of the Playmander. While Labor won the popular vote with 52 percent to the LCL's 43.8 percent, Labor suffered a two-seat swing, leaving both parties with 19 seats each. Conservative independent Tom Stott threw his support to the LCL. Playford's successor as LCL leader, Steele Hall, was highly embarrassed at the manner in which he became premier, and immediately set about enacting a fairer system. A few months after taking office, Hall enacted a new electoral map with 47 seats—28 seats in Adelaide and 19 in the country. Previously, there had been 39 seats—13 in Adelaide and 26 in country areas. However, for some time the LCL's base in Adelaide had been limited to the wealthy eastern crescent and the area around Holdfast Bay. While it came up short of "one vote one value," as Labor demanded, the new system allowed Adelaide to elect a majority of the legislature, all but assuring a Labor victory at the next election. By nearly all accounts, Hall knew that he was effectively handing the premiership to his Labor counterpart, Don Dunstan, at the next election. As expected, Labor won the 1970 election handily.
- Queensland
In Queensland, the malapportionment initially benefitted the Labor Party, since many small rural constituencies were dominated by workers in provincial cities who were organised into the powerful Australian Workers' Union. But after 1957, the Country Party (later renamed the National Party) governments of Sir Frank Nicklin and Sir Joh Bjelke-Petersen tweaked the system to give the upper hand to their rural base and isolate Labor support in Brisbane and provincial cities. In later years, this system made it possible for Bjelke-Petersen to win elections with only a quarter of the first preference votes. On average, a Country/National seat took only 7,000 votes to win, compared with 12,000 for a Labor seat. Combined with the votes of the Liberals (in Queensland, the National Party had historically been the senior partner in the non-Labor coalition), this was enough to lock Labor out of power even in years when Labor was the biggest single party in the legislature. This "Bjelkemander" was not overcome until the final defeat of the Nationals in 1989. Under new Labor premier Wayne Goss, a revised map was enacted with 40 seats in Brisbane and 49 in the country. Seats had roughly the same number of voters, with a greater tolerance allowed for seats in rural areas.
- Western Australia
Western Australia retained a significant malapportionment in the Legislative Assembly until 2008. Under the previous system, votes in the country were worth up to four times the value of votes in Perth, the state's capital city, even though Perth contained almost three-fourths of the state's population. On 20 May 2005 the state Parliament passed new electoral laws, removing the malapportionment with effect from the following election. Under the new laws, electorates must have a population of 21,343, with a permitted variation of 10%. Electorates with a land area of more than 100,000 km² (40,000 mi²) are permitted to have a variation of 20%, in recognition of the difficulty of representing the sparsely populated north and east of the state.[25] Large districts would be attributed an extra number of notional voters, equal to 1.5% the area of the district in square kilometres, for the purposes of this calculation. This Large District Allowance will permit large rural districts to have many fewer voters than the average district enrolment. The Office of the Electoral Distribution Commissioners[26] gives the following example: Central Kimberley-Pilbara district has 12601 electors and an area of 600038 square kilometres. The average district enrolment for WA is 21343. Central Kimberley-Pilbara thus obtains 9000 notional extra electors, bringing its notional total to 21601, which is acceptably close to the average district enrolment.
A modified form of malapportionment was, however, retained for the Legislative Council, the state upper house. According to ABC election analyst Antony Green, the rural weighting in the Legislative Council is still significant enough that a Liberal state premier has no choice but to include the National Party in his government, even if the Liberals theoretically have enough seats in the Legislative Assembly to govern alone.[27]
The Parliament
The Parliament of Australia is a bicameral (two-house) Parliament. It combines some of the features of the Parliament of the United Kingdom with some features of the United States Congress. This is because the authors of the Australian Constitution had two objectives: to reproduce as faithfully as possible the Westminster system of parliamentary government, while creating a federation in which there would be a division of powers between the national government and the states, regulated by a written Constitution.
In structure, the Australian Parliament resembles the United States Congress. There is a House of Representatives elected from single-member constituencies of approximately equal population, and there is a Senate consisting of an equal number of Senators from each state, regardless of population (since 1975 there have also been Senators representing the territories).
But in function, the Australian Parliament follows the Westminster system. The Prime Minister holds office because they can command the support of the majority of the House of Representatives, and must resign or advise an immediate election if the house passes a vote of no-confidence in their administration. If they fail to do so, they risk dismissal by the Governor-General. All ministers are required to be members of Parliament (although the Constitution permits a person who is not currently a member of parliament to hold a ministerial portfolio for a maximum period of three months).
The House of Representatives
The Australian House of Representatives has 150 members elected from single-member constituencies (formally called "Electoral Divisions", but usually called seats or electorates in Australia; see Australian electorates) for three-year terms. Voters must fill out the ballot paper by numbering all the candidates in order of their preference. Failure to number all the candidates, or an error in numbering, renders the ballot informal (invalid).[28] The average number of candidates has tended to increase in recent years: there are frequently 10 or 12 candidates in a seat, and at the Wills by-election in April 1992 there were 22 candidates.[29] This has made voting increasingly onerous, but the rate of informal voting has increased only slightly.
The low rate of informal voting is largely attributed to advertising from the various political parties indicating how a voter should number their ballot paper, called a How-to-Vote Card. On election day, volunteers from political parties stand outside polling places, handing voters a card which advises them how to cast their vote for their respective party. Thus, if a voter wishes to vote for the Liberal Party, they may take the Liberal How-to-Vote Card and follow its instructions. While they can lodge their vote according to their own preferences, Australian voters show a high degree of party loyalty in following their chosen party's card.
A disinterested voter who has formed no personal preference may simply number all the candidates sequentially, 1, 2, 3, etc., from top to bottom of the ballot paper, a practice termed donkey voting, which advantages those candidates whose names are placed nearest to the top of the ballot paper. Before 1984, candidates were listed in alphabetical order, which led to a profusion of Aaronses and Abbotts contesting elections. A notable example was the 1937 Senate election, in which the Labor candidate group in New South Wales consisted of Amour, Ashley, Armstrong and Arthur—all of whom were elected. Since 1984, the listed order of candidates on the ballot paper has been determined by drawing lots, a ceremony performed publicly by electoral officials immediately after the appointed time for closure of nominations.
Lower house primary, two-party and seat results since 1910
A two-party system has existed in the Australian House of Representatives since the two non-Labor parties merged in 1909. The 1910 election was the first to elect a majority government, with the Australian Labor Party concurrently winning the first Senate majority. A two-party-preferred vote (2PP) has been calculated since the 1919 change from first-past-the-post to preferential voting and subsequent introduction of the Coalition. ALP = Australian Labor Party, L+NP = grouping of Liberal/National/LNP/CLP Coalition parties (and predecessors), Oth = other parties and independents.
Primary vote | 2PP vote | Seats | |||||||
---|---|---|---|---|---|---|---|---|---|
ALP | L+NP | Oth. | ALP | L+NP | ALP | L+NP | Oth. | Total | |
7 Sep 2013 election | 33.4% | 45.6% | 21.1% | 46.5% | 53.5% | 55 | 90 | 5 | 150 |
3–5 Sep 2013 poll | 33% | 46% | 21% | 46% | 54% | ||||
21 Aug 2010 election | 38.0% | 43.3% | 18.8% | 50.1% | 49.9% | 72 | 72 | 6 | 150 |
17–19 Aug 2010 poll | 36.2% | 43.4% | 20.4% | 50.2% | 49.8% | ||||
24 Nov 2007 election | 43.4% | 42.1% | 14.5% | 52.7% | 47.3% | 83 | 65 | 2 | 150 |
20–22 Nov 2007 poll | 44% | 43% | 13% | 52% | 48% | ||||
9 Oct 2004 election | 37.6% | 46.7% | 15.7% | 47.3% | 52.7% | 60 | 87 | 3 | 150 |
6–7 Oct 2004 poll | 39% | 45% | 16% | 50% | 50% | ||||
10 Nov 2001 election | 37.8% | 43.0% | 19.2% | 49.0% | 51.0% | 65 | 82 | 3 | 150 |
7–8 Nov 2001 poll | 38.5% | 46% | 15.5% | 47% | 53% | ||||
3 Oct 1998 election | 40.1% | 39.5% | 20.4% | 51.0% | 49.0% | 67 | 80 | 1 | 148 |
30 Sep–1 Oct 1998 poll | 44% | 40% | 16% | 53% | 47% | ||||
2 Mar 1996 election | 38.7% | 47.3% | 14.0% | 46.4% | 53.6% | 49 | 94 | 5 | 148 |
28–29 Feb 1996 poll | 40.5% | 48% | 11.5% | 46.5% | 53.5% | ||||
13 Mar 1993 election | 44.9% | 44.3% | 10.7% | 51.4% | 48.6% | 80 | 65 | 2 | 147 |
11 Mar 1993 poll | 44% | 45% | 11% | 49.5% | 50.5% | ||||
24 Mar 1990 election | 39.4% | 43.5% | 17.1% | 49.9% | 50.1% | 78 | 69 | 1 | 148 |
11 Jul 1987 election | 45.8% | 46.1% | 8.1% | 50.8% | 49.2% | 86 | 62 | 0 | 148 |
1 Dec 1984 election | 47.6% | 45.0% | 7.4% | 51.8% | 48.2% | 82 | 66 | 0 | 148 |
5 Mar 1983 election | 49.5% | 43.6% | 6.9% | 53.2% | 46.8% | 75 | 50 | 0 | 125 |
18 Oct 1980 election | 45.2% | 46.3% | 8.5% | 49.6% | 50.4% | 51 | 74 | 0 | 125 |
10 Dec 1977 election | 39.7% | 48.1% | 12.2% | 45.4% | 54.6% | 38 | 86 | 0 | 124 |
13 Dec 1975 election | 42.8% | 53.1% | 4.1% | 44.3% | 55.7% | 36 | 91 | 0 | 127 |
18 May 1974 election | 49.3% | 44.9% | 5.8% | 51.7% | 48.3% | 66 | 61 | 0 | 127 |
2 Dec 1972 election | 49.6% | 41.5% | 8.9% | 52.7% | 47.3% | 67 | 58 | 0 | 125 |
25 Oct 1969 election | 47.0% | 43.3% | 9.7% | 50.2% | 49.8% | 59 | 66 | 0 | 125 |
26 Nov 1966 election | 40.0% | 50.0% | 10.0% | 43.1% | 56.9% | 41 | 82 | 1 | 124 |
30 Nov 1963 election | 45.5% | 46.0% | 8.5% | 47.4% | 52.6% | 50 | 72 | 0 | 122 |
9 Dec 1961 election | 47.9% | 42.1% | 10.0% | 50.5% | 49.5% | 60 | 62 | 0 | 122 |
22 Nov 1958 election | 42.8% | 46.6% | 10.6% | 45.9% | 54.1% | 45 | 77 | 0 | 122 |
10 Dec 1955 election | 44.6% | 47.6% | 7.8% | 45.8% | 54.2% | 47 | 75 | 0 | 122 |
29 May 1954 election | 50.0% | 46.8% | 3.2% | 50.7% | 49.3% | 57 | 64 | 0 | 121 |
28 Apr 1951 election | 47.6% | 50.3% | 2.1% | 49.3% | 50.7% | 52 | 69 | 0 | 121 |
10 Dec 1949 election | 46.0% | 50.3% | 3.7% | 49.0% | 51.0% | 47 | 74 | 0 | 121 |
28 Sep 1946 election | 49.7% | 39.3% | 11.0% | 54.1% | 45.9% | 43 | 26 | 5 | 74 |
21 Aug 1943 election | 49.9% | 23.0% | 27.1% | 58.2% | 41.8% | 49 | 19 | 6 | 74 |
21 Sep 1940 election | 40.2% | 43.9% | 15.9% | 50.3% | 49.7% | 32 | 36 | 6 | 74 |
23 Oct 1937 election | 43.2% | 49.3% | 7.5% | 49.4% | 50.6% | 29 | 44 | 2 | 74 |
15 Sep 1934 election | 26.8% | 45.6% | 27.6% | 46.5% | 53.5% | 18 | 42 | 14 | 74 |
19 Dec 1931 election | 27.1% | 48.4% | 24.5% | 41.5% | 58.5% | 14 | 50 | 11 | 75 |
12 Oct 1929 election | 48.8% | 44.2% | 7.0% | 56.7% | 43.3% | 46 | 24 | 5 | 75 |
17 Nov 1928 election | 44.6% | 49.6% | 5.8% | 48.4% | 51.6% | 31 | 42 | 2 | 75 |
14 Nov 1925 election | 45.0% | 53.2% | 1.8% | 46.2% | 53.8% | 23 | 50 | 2 | 75 |
16 Dec 1922 election | 42.3% | 47.8% | 9.9% | 48.8% | 51.2% | 29 | 40 | 6 | 75 |
13 Dec 1919 election | 42.5% | 54.3% | 3.2% | 45.9% | 54.1% | 25 | 38 | 2 | 75 |
5 May 1917 election | 43.9% | 54.2% | 1.9% | – | – | 22 | 53 | 0 | 75 |
5 Sep 1914 election | 50.9% | 47.2% | 1.9% | – | – | 42 | 32 | 1 | 75 |
31 May 1913 election | 48.5% | 48.9% | 2.6% | – | – | 37 | 38 | 0 | 75 |
13 Apr 1910 election | 50.0% | 45.1% | 4.9% | – | – | 42 | 31 | 2 | 75 |
Polling conducted by Newspoll and published in The Australian. Three percent margin of error. |
Counting votes in elections for the House of Representatives
The House of Representatives uses full preferential voting, which is known outside Australia by names such as "instant runoff voting" (IRV) and "alternative voting".
When the polls close at 6pm on election day, the votes are counted. The count is conducted by officers of the Australian Electoral Commission, watched by nominated volunteer observers from the political parties, called scrutineers, who are entitled to observe the whole voting process from the opening of the booth. The votes from each polling booth in the electorate are tallied at the office of the returning officer for the electorate. If one of the candidates has more than 50% of the vote, then they are declared elected. Australian politics are influenced by social and economic demographics, though the correlation between "class" and voting is not always simple.[30] Typically, the National Party will poll higher in rural seats. The Liberal Party and the Australian Labor Party are not as easily generalised. In a strong seat, the elected party might win up to 80% of the two-party-preferred vote. In the 2004 federal election, the highest winning margin in a seat was 25.1%,[31] with most seats won by a margin of less than 10%.
In the remaining seats, no single candidate will have a majority of the primary votes (or first-preference votes). A hypothetical result might look like this:
-
White (Democrat) 6,000 06.0% Smith (Labor) 45,000 45.0% Jones (Liberal) 35,000 35.0% Johnson (Green) 10,000 10.0% Davies (Ind) 4,000 04.0%
On election night, an interim distribution of preferences called a TCP (two-candidate-preferred) count is performed. The electoral commission nominates the two candidates it believes are most likely to win the most votes and all votes are distributed immediately to one or the other preferred candidate.[32] This result is indicative only and subsequently the formal count will be performed after all "declaration" (e.g. postal, absent votes) votes are received.
In this example, the candidate with the smallest vote, Davies, will be eliminated, and his or her preferences will be distributed: that is, his or her 4,000 votes will be individually re-allocated to the remaining candidates according to which candidate received the number 2 vote on each of those 4000 ballot papers. Suppose Davies's preferences split 50/50 between Smith and Jones. After re-allocation of Davies's votes, Smith would have 47% and Jones 37% of the total votes in the electorate. White would then be eliminated. Suppose all of White's preferences went to Smith. Smith would then have 53% and would be declared elected. Johnson's votes would not need to be distributed.
Exhausted preferences
The exhausted counts correspond to votes that ought to be informal, if strictly following the rules above, but were deemed to have expressed some valid preferences. The Electoral Act has since been amended to almost eliminate exhausted votes.
Section 268(1)(c) of the Commonwealth Electoral Act 1918 now has the effect of making the vote of any elector that does not preference every candidate on the ballot paper an informal vote as opposed to counting the vote until the voter's preference exhausts.
Two-party majorities, swings and pendulums
Since 1984 the preferences of all candidates in House of Representatives seats have been distributed, even if this is not necessary to determine the winner of the seat. This is done to determine the percentage of the votes obtained by the winning candidate after the distribution of all preferences. This is called the two-party-preferred vote. For example, if (in the example given above), Smith finished with 58% of the vote after the distribution of Johnson's preferences, Smith's two-party vote would be 58% and the seat would be said to have a two-party majority of 8%. It would therefore need a two-party swing of 8 percentage points to be lost to the other side of politics at the next election.
Once the two-party majorities in all seats are known, they can then be arranged in a table to show the order in which they would be lost in the event of an adverse swing at the next election. Such tables frequently appear in the Australian media and are called election pendulums or sometimes Mackerras pendulums after the political scientist Malcolm Mackerras, who popularised the idea of the two-party vote in his 1972 book Australian General Elections.
Here is a sample of the federal election pendulum from the 2001 election, showing some of the seats held by the Liberal-National Party coalition government, in order of their two-party majority. A seat with a small two-party majority is said to be a marginal seat or a swinging seat. A seat with a large two-party majority is said to be a safe seat, although "safe" seats have been known to change hands in the event of a large swing.
-
Seat State Majority Member Party HINKLER Qld 00.0 Paul Neville NPA SOLOMON NT 00.1 Dave Tollner Lib ADELAIDE SA 00.2 Hon Trish Worth Lib CANNING WA 00.4 Don Randall Lib DOBELL NSW 00.4 Ken Ticehurst Lib PARRAMATTA NSW 01.1 Ross Cameron Lib McEWEN Vic 01.2 Fran Bailey Lib PATERSON NSW 01.4 Bob Baldwin Lib HERBERT Qld 01.6 Peter Lindsay Lib RICHMOND NSW 01.6 Hon Larry Anthony NPA DEAKIN Vic 01.7 Philip Barresi Lib EDEN-MONARO NSW 01.7 Gary Nairn Lib HINDMARSH SA 01.9 Hon Christine Gallus Lib
Redistributions
The boundaries of Australian electoral constituencies are drawn up by the Australian Electoral Commission, an independent statutory authority, completely independent of political considerations. Members of Parliament and political parties may make submissions to the Commission on proposed new boundaries, but any interference with the Commission's deliberations would be a serious offence.
The Electoral Act requires that all seats have approximately equal numbers of enrolled voters. When the Commission determines that population shifts within a state have caused some seats to have too many or too few voters, new boundaries are drawn up. This is called a redistribution. Redistributions are also held when the Commission determines (following a formula laid down in the Act) that the distribution of seats among the states and territories must be changed because some states are growing faster than others.
In 2003, for example, redistributions were held in Victoria, Queensland and South Australia. South Australia lost one seat, while Queensland gained a seat. Victoria kept the same number of seats, but one seat was abolished and one new seat created.
House casual vacancies
If a member's seat becomes vacant mid-term, whether through resignation, death or some other possible reasons, a by-election may be held. Further details are at Casual vacancies in the Australian Parliament.
The Senate
The Australian Senate has 76 members: each of the six states elects 12 Senators, and the Northern Territory (NT) and the Australian Capital Territory (ACT) each elect two Senators. The several other Australian Territories have very small populations and are represented by Northern Territory and ACT Senators (for example, Christmas Island residents are represented by NT Senators, while Jervis Bay Territory residents are represented by ACT Senators).
Senators for the states serve six-year terms, with half the Senators from each state usually being elected at each federal election. The terms of the territory Senators coincide with the duration of the House of Representatives.
The Senate is elected both proportionately and preferentially, except that each state has an equal number of seats so that the distribution of seats to states is non-proportional to the total Australian population. Thus, although within each state the seats proportionally represent the vote for that state, overall the less populous states are proportionally stronger in representation for their population compared to the more populous states.
Following the 2013 election, the Abbott Liberal government announced it would investigate changing the electoral system for the Senate. On 22 February 2016, the Turnbull Liberal government announced several proposed changes.[33] The changes had the support of the Liberal/National Coalition, the Australian Greens, and Nick Xenophon − a three-vote majority.[34] The Senate reform legislation passed both houses of the Parliament of Australia on 18 March 2016 after the Senate sat all night debating the bill.[35]
The changes abolished group voting tickets and introduced optional preferential voting, along with party logos on the ballot paper. The ballot paper continues to have a box for each party above a heavy line, with each party's candidates in a column below that party's box below the solid line. Previously, a voter could either mark a single box above the line, which triggered the party's group voting ticket (a pre-assigned sequence of preferences), or place a number in every box below the line to assign their own preferences. As a result of the changes, voters may assign their preferences for parties above the line (numbering as many boxes as they wish), or individual candidates below the line, and are not required to fill all of the boxes. Both above and below the line voting are now optional preferential voting. For above the line, voters will be instructed to write at least their first six preferences, however, a "savings provision" will still count the ballot if less than six were given. As a result, fewer votes are expected to be classed as informal, however, more ballots will "exhaust" as a result (i.e. some votes are not counted towards electing any candidate). For below the line, voters will be required to write at least their first 12 preferences. Voters will be free to continue numbering as many preferences as they like beyond the minimum number specified. Another savings provision will allow ballot papers with at least 6 below the line preferences to be formal, catering for people who confuse the above and below the line instructions; an additional change to the savings provision will also accept below the line votes with a higher number of sequence errors than previously, treating the sequence as stopping at the first error (missed or repeated numbers).
ABC electoral psephologist Antony Green wrote several publications on various aspects of the proposed Senate reforms.[36][37][38][39][40][41]
The Senate count
The form of preferential voting used in the Senate is technically known as the "Inclusive Gregory".[42]
The system for counting Senate votes is complicated, and a final result is sometimes not known for several weeks. When the Senate vote is counted, a quota for election is determined. This is the number of valid votes cast, divided by the number of Senators to be elected plus one.
For example, here is the Senate result for the state of New South Wales from the 1998 federal election. For greater clarity the votes cast for 50 minor party and independent candidates have been excluded.
The quota for election was 3,755,725 divided by seven, or 536,533.
Enrolment: 4,031,749 Turnout: 3,884,333 (96.3%) Informal votes: 128,608 (03.3%) Formal votes: 3,755,725 Quota for election: 536,533 -------------------------------------------------------------------- Steve HUTCHINS ALP 1,446,231 38.5 ELECTED 1 Hon John Faulkner * ALP 2,914 00.1 Group H Michael Forshaw * ALP 864 00.0 Q:2.7073 Ursula Stephens ALP 2,551 00.1
David Oldfield ON 359,654 09.6 Group K Brian Burston ON 570 00.0 Q:0.6729 Bevan O'Regan ON 785 00.0
Bill HEFFERNAN * Lib 1,371,578 36.5 ELECTED 2 Dr John Tierney * Lib 1,441 00.0 Group L Sandy Macdonald * NPA 1,689 00.0 Q:2.5638 Concetta Fierravanti-Wells Lib 855 00.0
Aden Ridgeway AD 272,481 07.3 Group M Matthew Baird AD 457 00.0 Q:0.5142 Suzzanne Reddy AD 2,163 00.1 David Mendelssohn AD 809 00.0
John Sutton Grn 80,073 02.1 Group U Catherine Moore Grn 748 00.0 Q:0.1521 Lee Rhiannon Grn 249 00.0 Suzie Russell Grn 542 00.0 -------------------------------------------------------------------- 128,608 (03.3%) informal 3,755,725 --------------------------------------------------------------------
In this table, the Group number allocated to each list is shown at right. Below that is the number of quotas polled by each list. Thus, "Q:2.7073" next to the Labor Party list indicates that the Labor candidates between them polled 2.7073 quotas.
It will be seen that the leading Labor and Liberal candidates, Hutchins and Heffernan, polled more than the quota. They were therefore elected on the first count. Their surplus votes were then distributed. The surplus is the candidate's vote minus the quota. Hutchins's surplus was thus 1,446,231 minus 536,533, or 909,698. These votes are multiplied by a factor (called the "transfer value") based on the proportion of ballot papers preferencing other parties. ABC Election commentator Antony Green believes that this method distorts preference allocation.[42]
After Hutchins's surplus votes were distributed, the count looked like this:
Votes Total after distributed distribution -------------------------------------------------------------------- HUTCHINS E 536,533 14.3 ELECTED 1 FAULKNER * 908,567 (99.9) 911,481 24.3 ELECTED 3 Forshaw * 196 (00.0) 1,060 00.0 Stephens 130 (00.0) 2,681 00.1
Oldfield 186 (00.0) 359,840 09.6 Burston 6 (00.0) 576 00.0 O'Regan 4 (00.0) 789 00.0
HEFFERNAN * E 1,371,578 36.5 ELECTED 2 Tierney * 13 (00.0) 1,454 00.0 Macdonald * 1 (00.0) 1,690 00.0 Fierravanti-Wells 1 (00.0) 856 00.0
Ridgeway 278 (00.0) 272,579 07.3 Baird 5 (00.0) 462 00.0 Reddy 3 (00.0) 2,166 00.1 Mendelssohn 4 (00.0) 813 00.0
Sutton 66 (00.0) 80,139 02.1 Moore 2 (00.0) 750 00.0 Rhiannon 1 (00.0) 250 00.0 Russell 0 542 00.0 -------------------------------------------------------------------- 909,698 3,755,725 --------------------------------------------------------------------
It will be seen that virtually all of Hutchins's surplus votes went to Faulkner, the second candidate on the Labor ticket, who was then elected. This is because all those voters who voted for the Labor party "above the line" had their second preferences automatically allocated to the second Labor candidate. All parties lodge a copy of their How-to-Vote Card with the Electoral Commission, and the Commission follows this card in allocating the preferences of those who vote "above the line." If a voter wished to vote, for example, Hutchins 1 and Heffernan 2, they would need to vote "below the line" by numbering each of the 69 candidates.
In the third count, Heffernan's surplus was distributed and these votes elected Tierney. Faulkner's surplus was then distributed, but these were insufficient to elect Forshaw. Likewise, Tierney's surplus was insufficient to elect McDonald.
After this stage of the count, the remaining candidates in contention (that is, the leading candidates in the major party tickets) were in the following position:
-------------------------------------------------------------------- HUTCHINS 536,533 14.3 ELECTED 1 FAULKNER * 536,533 14.3 ELECTED 3 Forshaw * 375,587 10.0 Oldfield 360,263 09.6 HEFFERNAN * 536,533 14.3 ELECTED 2 Tierney * 536,533 14.3 ELECTED 4 Macdonald * 300,313 08.0 Ridgeway 273,109 07.3 Sutton 80,186 02.1 -------------------------------------------------------------------- 3,755,725 --------------------------------------------------------------------
All the other candidates were then eliminated one by one, starting with the candidates with the smallest number of votes, and their votes were distributed among the candidates remaining in contention in accordance with the preferences expressed on their ballot papers. After this process was completed, the remaining candidates were in the following position:
-------------------------------------------------------------------- HUTCHINS 536,533 14.3 ELECTED 1 FAULKNER * 536,533 14.3 ELECTED 3 Forshaw * 450,446 12.0 Oldfield 402,154 10.7 HEFFERNAN * 536,533 14.3 ELECTED 2 Tierney * 536,533 14.3 ELECTED 4 Macdonald * 357,572 09.5 Ridgeway 286,157 07.6 Sutton 112,602 03.0 -------------------------------------------------------------------- 3,755,725 --------------------------------------------------------------------
Sutton was then eliminated. 80% of Sutton's preferences went to Ridgeway, giving Ridgeway more votes than McDonald. McDonald was then eliminated, and 93% of his preferences went to Ridgeway, thus giving him a quota and the fifth Senate seat. Ridgeway's surplus was then distributed, and 96% of his votes went to Forshaw, thus giving him a quota and the sixth seat. Oldfield was the last remaining unsuccessful candidate.
A final point needs to be explained. It was noted above that when a candidate polls more votes than the quota, their surplus vote is distributed to other candidates. Thus, in the example given above, Hutchins's surplus was 909,698, or 1,446,231 (his primary vote) minus 536,533 (the quota). It may be asked: which 909,698 of Hutchins's 1,446,231 primary votes are distributed? Are they chosen at random from among his votes? In fact they are all distributed, but at less than their full value. Since 909,698 is 62.9% of 1,446,231, each of Hutchins's votes is transferred to other candidates as 62.9% of a vote: each vote is said to have a transfer value of 0.629. This avoids any possibility of an unrepresentative sample of his votes being transferred. After each count the candidate's progressive total is rounded down to the nearest whole number. This means that a small number of votes are lost by fractionation in the final count.
When a person is appointed Divisional Returning Officer for a seat, his electoral enrolment will be transferred from the electorate where he lives to the one he administers. Normally he will be precluded from voting at an election, but instead will have two special powers; these are:
1. If during the count there are two candidates with equal lowest votes, he can decide which will be excluded.
2. If at the end of the count the two candidates left have an equal number of votes, he will get to vote in the election by giving a casting vote to the candidate he prefers. This is his personal vote, just like any other elector's, and is awarded at his sole discretion.
Senate casual vacancies
If a senator's seat becomes vacant mid-term, through resignation, death or other cause, the legislature of the relevant state or territory chooses a replacement senator. Further details are at Casual vacancies in the Australian Parliament.
Double dissolutions
Under the Australian Constitution, the House of Representatives and the Senate generally have equal legislative powers (the only exception being that appropriation (supply) bills must originate in the House of Representatives). This means that a government formed in the House of Representatives can be frustrated if a Senate majority rejects or delays passage of its legislative bills.
In such circumstances, Section 57 of the Constitution allows the Governor-general to dissolve both the House of Representatives and the Senate–termed a "double dissolution"–and issue writs for an election in which every seat in the Parliament is contested. The Governor-general would usually take such action only on the advice of the prime minister.
Nominations
Candidates for either house must formally nominate with the Electoral Commission. The signature of the Registered Officer of a party registered under the Electoral Act is required for a party-endorsed candidate. A registered party must have at least 500 members. Fifty signatures of eligible voters are required for an independent candidate. A deposit of $1000 is required for a candidate for the House of Representatives, and $2000 for a candidate for the Senate; this deposit is refunded if the candidate gains 4% of the first preference votes. To receive public funding, a party or candidate must receive at least 4% of the vote.[43]
References
- ^ Scott Bennett and Rob Lundie, 'Australian Electoral Systems', Research Paper no. 5, 2007–08, Department of the Parliamentary Library, Canberra.
- ^ "Section 101(6), Commonwealth Electoral Act 1918". Retrieved 16 September 2012.
- ^ http://www.aec.gov.au/FAQs/Enrolment.htm#not_enrolled_for_xxyears
- ^ The Age, 9 August 2013: Enrol to vote or you'll miss out, AEC warns
- ^ SmartRoll: The NSW Electoral Commission's Automatic Enrolment Project at Electoral Commission NSW
- ^ Scott Bennett, Compulsory voting in Australian national elections, Research Brief No. 6, 2005–06, Department of the Parliamentary Library, Canberra.
- ^ a b "Compulsory Voting in Australia" (PDF). Australian Electoral Commission. 16 January 2006. Retrieved 2011-02-04.
- ^ ""The case for compulsory voting"; by Chris Puplick". Mind-trek.com. 1997-06-30. Retrieved 2010-06-16.
- ^ "Odgers, Australian Senate Practice". Aph.gov.au. Retrieved 2010-12-29.
- ^ Independent Review of Local Government Elections: Issues Paper . Retrieved 28 July 2010.
- ^ "Electoral Offences". Voting within Australia – Frequently Asked Questions. Australian Electoral Commission. Retrieved 2006-10-21.
- ^ Australian Electoral Commission, Electoral Pocketbook, Australian Electoral Commission, Canberra, June 2006, pp. 71–77. Retrieved September 2007.
- ^ a b Derek Chong, Sinclair Davidson,Tim Fry "It's an evil thing to oblige people to vote" Policy vol. 21 No. 4, Summer 2005-06
- ^ "Blank vote legitimate, Latham asserts". Watoday.com.au. Retrieved 2010-12-29.
- ^ Burton-Bradley, Robert (2010-08-16). "Latham not breaking the law, says AEC". news.com.au.
- ^ Frame, T Church and State, New South Books, 2006, p55
- ^ Evans, Tim Compulsory voting in Australia at Australian Electoral Commission official website, June 2006. Accessed 15 June 2013
- ^ Adam Carr. "By-Elections 1917-19". Psephos Australian Election Archive. Retrieved 2011-02-10.
- ^ "Australia's major electoral developments". Australian Electoral Commission. Retrieved 2011-02-16.
- ^ "Electronic voting and counting". Australian Capital Territory Electoral Commission. Retrieved 2011-02-16.
- ^ "Preferential Voting". Australianpolitics.com. Retrieved 2010-06-16.
- ^ "How the House of Representatives votes are counted". Australian Electoral Commission. 13 February 2013. Retrieved 2 May 2015.
- ^ "Voters stung by back room deals between minor parties". news.com.au. Retrieved 7 May 2015.
- ^ Your vote and the Senate: The Big Switch
- ^ "View News Headlines". Findlaw.com.au. 2005-05-20. Retrieved 2010-06-16.
- ^ Information Centre for the 2007 Electoral Distribution, Where will you be in 2009?, p2.
- ^ Green, Antony (2013-02-07). "2013 WA Election Preview". Australian Broadcasting Corporation.
- ^ "Voting HOR". Aec.gov.au. 2007-07-31. Retrieved 2010-06-16.
- ^ Adam Carr. "By-Elections 1990-1993". Psephos Australian Election Archive. Retrieved 2011-02-10.
- ^ "Betts, K. – People and Place Vol. 4 No. 4". Elecpress.monash.edu.au. Retrieved 2010-06-16.
- ^ "2004 Federal Election. Latest Seat Results. Election Results. Australian Broadcasting Corporation". ABC. Retrieved 2010-06-16.
- ^ "Counting the Votes". Aec.gov.au. 2008-02-13. Retrieved 2010-06-16.
- ^ Senate election reforms announced, including preferential voting above the line, Australian Broadcasting Corporation, 22 February 2016
- ^ Explainer: what changes to the Senate voting system are being proposed?, Stephen Morey, The Conversation, 23 February 2016
- ^ Electoral laws passed after marathon Parliament sitting: ABC 18 March 2016
- ^ Senate Reform - Below the Line Optional Preferential Voting Included in Government's Legislation: Antony Green ABC 2 March 2016
- ^ Would Electoral Reform Deliver the Coalition a Senate Majority at a Double Dissolution?: Antony Green ABC 17 February 2016
- ^ The Origin of Senate Group Ticket Voting, and it didn't come from the Major Parties: Antony Green ABC 23 September 2015
- ^ The Likely Political Consequences of Proposed Changes to the Senate's Electoral System: Antony Green ABC 24 June 2015
- ^ By Accident Rather than Design - a Brief History of the Senate's Electoral System: Antony Green ABC 10 June 2015
- ^ All Senate reform articles: Antony Green ABC
- ^ a b "Antony Green's Election Blog: Distortions in the Queensland Senate Count". Blogs.abc.net.au. 2010-09-16. Retrieved 2010-12-29.
- ^ "Candidates – Frequently Asked Questions". Australian Electoral Commission. Retrieved 2013-07-23.
External links
Library resources about Electoral system of Australia |
- The Parliament of Australia
- The Australian Electoral Commission
- Adam Carr's Australian Election Archive
- Proportional Representation Society of Australia
|
|